The Two Bowl Bakery Utility Sink with Drainboard is part of the Pro Bowl Series. All sink bowls are a standard 12-inches deep and are constructed of 16 gauge type 304 stainless steel, fabricated with all welds ground and polished into a one-piece sanitary bowl. Unlike other manufacturer's drawn bowl construction, Pro Bowl sinks guarantee full gauge thickness even in the corners. All corners are coved at a 5/8-inch radius to meet National Sanitation Foundation standards. The sink bottom is formed for drainage and includes a 3-1/2 inch diameter die stamped opening. The sink frame is constructed of 16 gauge type 304 stainless steel and features a 10-inch high backsplash with a two-inch return to wall at a 45-degree angle and down 3/4 inch. The front and sides of the frame have a two-inch edge rolled 180 degrees. All corners are coved at a 5/8-inch radius and welded, ground, and polished into a sanitary single piece. The legs are constructed of 1-5/8 inch diameter pre-galvanized steel tube. The legs attach to the sink with sanitary gussets, each with two set screws to lock the legs in place. Adjustable bracing (1-1/4 inch tubing) on three sides insures no interference with plumbing fixtures, and adjustable bullet feet allow for leveling.Although the Two Bowl Bakery Utility Sink with Drainboard arrives pre-welded, it requires some simple assembly. You will need to attach the legs, the hardware, and install the drain baskets (included). Please note: This sink is constructed with a set of standard faucet holes (1-1/8 inch diameter, eight inches apart), but does not include the faucet. You can easily customize your sink by purchasing a separate faucet fixture

Dimensions:
64-3/16L x 33-1/2W, 20L x 28W bowls, 20L drainboard
68-3/16L x 33-1/2W, 20L x 28W bowls, 24L drainboard
74-3/16L x 33-1/2W, 20L x 28W bowls, 30L drainboard
All sinks are 36 inches tall, with 12-inch bowl depth.
Weight:
64-3/16 x 33-1/2: 375 lbs
68-3/16 x 33-1/2: 458 lbs
74-3/16 x 33-1/2: 486 lbs
Finish: Stainless Steel