Z Purlin Roll Forming Machine

Z Channel Steel Roll Forming Machine

 

1. Flow Chart:

Uncoiler---Feeding Guide---Levelling---Punching---Feeding Guide---Roll Forming Machine---Cutting---Run-out Table

2. Components of Machine:

2.1 Simple Uncoiler (Manual)

2.2 Roll Forming Machine

2.3 PLC Controlling Box

2.4 Hydraulic Station

2.5 Run-out Table

3. Main Technical Parameters:

3.1 Thickness of Material: 2.5mm Galvanized Steel Coil

3.2 Rolling Stations: 18 Stations

3.3 Diameter of Roller: Φ80mm

3.4 Roller applied to Bearing Steel Quenched

3.5 Forming Speed: 6-10m/min

3.6 Transmission: l.5" Chain Transmission

3.7 Motor Power: 15KW

3.8 Dimension: 13m X 1.5m X 1.3m

3.9 Electronic Controlling System: Panasonic PLC

3.10 Total Weight: 12 tons

3.11 Hydraulic Cutting

  3.11.1 Hydraulic Station Power: 11kw

  3.11.2 Hydraulic Pressure: 20Mpa

  3.11.3 Hydraulic Blade Material: Cr 12

  3.11.4 Cutting Length Error: ±2mm

  3.11.5 Punching Mould: Punching Head 4pcs

4. Quality Requirements:

4.1 Thickness of Chrome on Roller: 0.05mm

4.2 Productions According to National Standard: GB/Tl2755—91;

4.3 Production is plate and without scratch.