Mould laser welding machine is the company's production of this series of laser welding machine is my company's tailored specifically for the mold industry-specific models,the machine is designed to replace the traditional argon welding machine.AA

All the key components of the machine employed the foreign imported products. The software interface using a large-screen LCD screen to display .It is simple and easy for operator to learn and to use. Keep a variety of operating modes, forever self-programming memory, will be applied to a variety of materials.

Advantages

Little heat-affect area , no distortion ,deep ,welding firmly. Dissolve fully, without leaving any traces of repair .No sag phenomenon disappeared at the junction.

Applicable to to repair cracks ,collapsed horn , touched edge and damaged sealing side.
Applicable to welding on horniness material (~HRC60)

High accuracy , the welding spot diameter is only 0.2mm-0.5mm

Little heat-affect area , no distortion of the processing parts.

No effect for etch after welding , low oxidation rate,the color of the processing parts is intact .

No stomata or sand hole disappeared after welding.

Can process at the welding point ,especially applicable to repairing mound requiring polishing.
The processing parts can reach 50-60 rockwell hardness.

Main technical indicators:
Max laser output average power: 200W

Max energy of single pulse :120J
Pulse width: 0.5 ~ 20ms
Laser wavelength: 1064nm
laser welding frequency: 0.5 ~ 100HZ

Optional adjustable spot size range: 0.2-2mm

Laser Power Supply:
Maximum Power: 8KW
Water pressure protection: ≤ 0.025MPa
Cooling water temperature: ≤ 35 ℃ -45 ℃

Cooling water flow: 10L/min
Laser welding wire: ∮ 1 ~ ∮ 0.2(Optional)

Observation System:

The observation system of the special microscope equipped with a cross cursor magnify 20X. Crosshair center aligned with the laser spot center (user can adjustable). With a high-speed electronic filter protection device to protect the operator from being eye injuryed, to ease the operator’s eye fatigue, improve work efficiency.

Control system:

Employed industrial PC with built-in for the dual closed-loop precision control.Its stability and running ability is far superior to similar products used by microcontroller control panel.

Gas protection system:
Synchronization with the internal computer-controlled argon gas protection system, can not be oxidized ,weld seam is more strong, beautiful. Use of synchronization with the laser emission control, to maximize savings argon.
Three-dimensional table travel: 200MM × 200MM × 300MM.
precisely move the workpiece can precisely.