The metal detector is suitable for detecting on the powder of chemical industry and food, granular products.
Gravity fall metal detection systems made first in China provide the significant improvement in stability and sensitivity compared to traditional analogue device.With special mechanical structure design, the detector can reduce interference of external factors including shaking, noise, and product effect.
This machine owns high detection sensitivity. It not only uses doublechannel detection to have stronger ability in controllingproduct effect, but is made by stainless steel to be sanitary and good corrosion resistance. All systems are designed for minimized height allowing them to be installed in applications when space is restricted.
|
Model
|
IMD-I-P
|
|||
|
Specifications
|
P75
|
P100
|
P150
|
|
|
Detection diameter
|
75mm
|
100mm
|
150mm
|
|
|
Detection sensitivity
|
Fe
|
Φ0.5mm ≥
|
Φ0.7mm ≥
|
Φ0.8mm ≥
|
|
SUS
|
Φ1.0mm ≥
|
Φ1.2mm ≥
|
Φ1.5mm ≥
|
|
|
Installation vertical height
|
700mm
|
800mm
|
1000mm
|
|
|
Detection capacity
|
3t/h
|
5t/h
|
10t/h
|
|
|
Alarm model
|
Sound and light alarm
|
|||
|
Exclusion
|
When detecting metal,flap excludes automatically |
|||
|
Pressure requirements
|
0.5Mpa ≥
|
|||
|
Environment
|
Temperature 10-40°C,humidity less than 85%
(avoid freezing,condensation) |
|||
|
Power supply
|
220V AC
|
|||
1. As mentioned above the sensitivity is in the empty state, and the actual sensitivity is relative with factory environment and product effect.
2. Detecting volume per hour is relative with product weight, the value of the table refer to a density is 1000kg/m3.
3. The products of different specifications can be ordered according to the customer's requirements