1. The receiver, model 816R, is equipped with a thumb wheel switch for turning the unit
on and adjusting the receiver gain. The tracking antenna is attached to the receiver with a
3 foot long cable. Also is equipped with a White LED light and a external earphone, The
receiver has been designed to filter AC power related noise. The receiver is constructed
of high impact plastic and is powered by one 9V battery.
on and adjusting the receiver gain. The tracking antenna is attached to the receiver with a
3 foot long cable. Also is equipped with a White LED light and a external earphone, The
receiver has been designed to filter AC power related noise. The receiver is constructed
of high impact plastic and is powered by one 9V battery.
2. The alligator clip leads are available to connect the transmitter to electrical wire, CATV
coax, telephone drops, irrigation control wires or metallic pipes.
coax, telephone drops, irrigation control wires or metallic pipes.
3. This locating system is packaged in a toolkit & box with extra batteries, external
earphone and has operating instructions in the behind of the toolkit.
earphone and has operating instructions in the behind of the toolkit.
Electrical
Output Voltage (open circuit): 9Vp-p
Output Frequency (nominal):
Carrier: 447.5KHz
Audio Modulation : 900Hz Battery :9 V DC
Battery Life (nominal)
816T: 35 hrs
816R :20 hrs
Physical Measurements
816T: 49x135x33 mm (1.93x5.31x1.3
816R: 43x168x27 mm (1.69x6.61x1.06 )
Kit :150x286x52 mm (5.91x11.26x2.05 )
Weight
816T: 124 g (4 oz)
816R: 148 g (5 oz)
Kit: 0.420 kg (15 oz)
Operating/Storage Conditions
Operating Temperature:
Celsius:-10℃ to 50℃
Fahrenheit: 14F to 122F
Storage Temperature: Celsius: -17℃ to7℃
Fahrenheit : 0 F to 167 F