Product Main

Specifications

Specifications
 
Module
ZRG-T8-2400-GSP9-A1 (transparent PC
ZRG-T8-2400-GTP9-A1 (stripe PC cover)
ZRG-T8-2400-GDP9-A1 (frosted PC cover)
Specifications:
Total power consumption 42W
LED consumption 36W
Input voltage AC90-250V, 50/60Hz
Power supply built-in constant current
Lighting source low power 3528/3014/5050 LEDs
LED quantity 576pcs
Dimension Φ26mm*2400mm
Material PC cover transparent
Lamp holder G13
Luminous flux 2900lm±10%
Luminous efficiency 70–80lm/W
Color temperature 2700-4500K,4500-6000K,6000-9000K
Viewing angle ≤120 °
CRI Ra﹥70
Working temperature -20~40℃(-4~104 °F)
Environment humidity <90﹪
Working environment indoor use
Protection rating IP44
Life-span 50,000 hours
Weight 720g
Certification CE, RoHS and UL pending
Warranty 2 years

Features:
1. No need for starter and ballasts, instant soft-start, no speckle, no flickering, no humming, no buzzing, no RF interference
2. The 2400mm 36W T8 LED tube lights Easy to install, replace T8/T10 conventional fluorescent light directly low maintenance cost. Lowers costs by reducing re-lamp frequency, especially in difficult to reach areas that require lifts
3. long life-span: life time 50,000hrs, 6 times longer than traditional fluorescent tubes

Applications:
36W 2400mm T8 LED Tube can be extensively applied to general lighting, such as mall, store, hotel, office, supermarket, commercial building, station, bus, warehouse, signage, residential, parking lot, home, restaurant , train, railway, subway station, bank, warehouse, exhibition gallery, library, closet, factory, cabinet, cupboard, kitchen, refrigeration units etc. Replace conventional fluorescent lamp or sodium lamp. Energy efficient, environmentally friendly.

36W 2400mm LED T8 tube light Installation
1 ) Fitting with starter, inductive (magnetic) fluorescent tube lighting
A.Remove the starter from the fitting
B. Plug the 36w 2400mm LED tube into the fitting directly, it would be better to remove both starter and ballast
2) Fitting with electrical ballast
A.Remove the electrical ballast from the fitting
B. Connect the anode & cathode directly
C. Plug the 36W T8 2400mm LED tube lighting into the fitting