NetWork Cable Tester
NF-8108 NetWork Cable Tester
Product features:
1.One person enough to complete cable continuity check
2. Checks wiring error in 5E, 6E, coaxial and telephone line
3. Locates the wiring or connection error
4. Measures cable length and determines the distance of open circuit and short circuit
5. Dynamically calibrates cable length and makes length measurement as accurate as 97%
6.Simple and easy use, big screen to display test clear
7. Portable unit with long battery life (wait-case 50 hours)
8.Automatically time-delay shut off
9.Measures length and pair with or without far-end recognizer
10.Locates cable and there are 8 far-end passive test jacks (ID no.: ID1 - ID 8)
11. Far-end recognize with prompting voice
12. Self-checking function and automatically compensates any change in battery capacity or ambient temperature
13. Single board computer software watchdog design and reliable operating
Description:
Network Cable Tester is a powerful special tool to prevent and solve cable installation
problem. Network cable tester is the best choice to verify any speech and data cable
installation procedure.The tester is capable to have a number of tests such as cable connection sequence,length , user jumper and cable connection continuity and determine any open circuit,
short circuit, jumper or cross-talk interference.It is a useful tool to reduce cable installation
cost and save cable installation time.
Technical parameters :
1) Overall Dimension
180×80×40mm
2) Power Supply
4×1.5V Size AA batteries with power consumption 16mA
3) Display
Special 4×16 character big screen LCD lattice (valid visual field 61.6×25.5 mm)
4) Type of Test Cable
STP/UTP twin twisted cable, coaxial cable, telephone line
5) Working Ambient Temperature
-10~+60
6) Tester Port
Tester RJ45 master port(M), tester LOOPBACK RJ45 port(L),far-end
recognizer RJ45 port(R). The extra BNC and RJ11 converters are used to
measure and check the continuity of coaxial cable and telephone line.
7) Length Measurement of Twin Twisted Cable
Scope: 1350M(31,200ft)
Calibration accuracy:3%(+/-0.5M or+/-5ft)(calibrating cable≥5M)
Shipment accuracy :5%(+/-0.5M or +/-1.5ft).(AMP,AT& T Class 5 cable)
Display: M or ft
8) Length Calibration
User can set calibration factor by himself with a given length cable. The
length of calibrating cable is more than 5M
9) Wire Sequence and Locating Cable Error
Check errors such as open circuit , short circuit , reverse connection, crossover
or cross-talk interference.
10) Locating Cable
8 far-end passive test jacks (ID 1≥ID 8)
11) Automatic Time-delay Shut Off Time
The tester does not operate for 30 minutes.
Mail: wire[at]