Genenal information
This Automatic AC Hipot Tester is designed for insulation resistance and voltage withstand testing of electrical devices and components according to New national standards of the power industry.It use a multitude of automate testing ways to detects lots of dangerous defects ,which ensure the insulation level and avoid any insulation accidents.a wide variety of models can be select to fulfil the different requirements and test conditions, ensure your effective testing.
Features:
1. Enhanced 320×240 LCD Display(Daylight visible );
2. Simple and easy to oprate;
3. Tesing process on-screen display;
4. Automated testing support ;
5. Automatic analysis function,easy to detect the spark-over, arcing-over faults;
6. Fully System Protect function, avoids Overvoltage, overcurrent operation;
7. Automatic capture the peak voltage, current;
8. Automatically contorl the voltage back to zero before the next step, to ensure safety;
9. Applicable for discharge test;
10.Anti-interference design, can be work in the harsh electromagnetic environment;
11.A multitude of extended functions, including Grounding detection, PLC Remote interface and Divider calibration Interface,and so on;
Technical Specifications
1. Maximum Output Voltage (KV): 0~ 1000 (depend on request);
2. capacity range (kVA): 0~ 1000 (depend on request);
3. Main Supply: AC220V±10%;
4. Voltage Accuracy(%): ≤1.5 0% (F.S);
5. Current Accuracy(%): ≤1.5 0% (F.S);
6. Duty Cycle: Continous;
7. Environmental: Humidity non condensing;
8. Timing rang : 0-999s;
9. Payment: T/T100% in advance;
10. Minimum Order : 1 set;
11. Delivery: 15 Work Days;
12. Packaging: Wooden case;
Applications:
One high voltage wire 1.5m
One connector wire 5m
One power wire 5m
One Ground Cables 5m
Other parts depend on required:
The ball-gap
Divider
Protective resistor
Discharge rod
This Automatic AC Hipot Tester is designed for insulation resistance and voltage withstand testing of electrical devices and components according to New national standards of the power industry.It use a multitude of automate testing ways to detects lots of dangerous defects ,which ensure the insulation level and avoid any insulation accidents.a wide variety of models can be select to fulfil the different requirements and test conditions, ensure your effective testing.
Features:
1. Enhanced 320×240 LCD Display(Daylight visible );
2. Simple and easy to oprate;
3. Tesing process on-screen display;
4. Automated testing support ;
5. Automatic analysis function,easy to detect the spark-over, arcing-over faults;
6. Fully System Protect function, avoids Overvoltage, overcurrent operation;
7. Automatic capture the peak voltage, current;
8. Automatically contorl the voltage back to zero before the next step, to ensure safety;
9. Applicable for discharge test;
10.Anti-interference design, can be work in the harsh electromagnetic environment;
11.A multitude of extended functions, including Grounding detection, PLC Remote interface and Divider calibration Interface,and so on;
Technical Specifications
1. Maximum Output Voltage (KV): 0~ 1000 (depend on request);
2. capacity range (kVA): 0~ 1000 (depend on request);
3. Main Supply: AC220V±10%;
4. Voltage Accuracy(%): ≤1.5 0% (F.S);
5. Current Accuracy(%): ≤1.5 0% (F.S);
6. Duty Cycle: Continous;
7. Environmental: Humidity non condensing;
8. Timing rang : 0-999s;
9. Payment: T/T100% in advance;
10. Minimum Order : 1 set;
11. Delivery: 15 Work Days;
12. Packaging: Wooden case;
Applications:
One high voltage wire 1.5m
One connector wire 5m
One power wire 5m
One Ground Cables 5m
Other parts depend on required:
The ball-gap
Divider
Protective resistor
Discharge rod