Specifications (BS-9300R, BS-9380 Series)
|
Model
|
BS-9300R
|
BS-9380
|
|
Constant current range(A)
|
0.01 ～ 2
|
0.01 ～ 2
|
|
Current measurement accuracy
|
± (0.1% FS + 0.1% RD)
|
± (0.1% FS + 0.1% RD)
|
|
Voltage measurement range(V)
|
0.1 ～ 10
|
0.1 ～ 10
|
|
Voltage measurement accuracy
|
± (0.1% FS + 0.1% RD)
|
± (0.1% FS + 0.1% RD)
|
|
Time measurement range(minute/step)
|
30000
|
30000
|
|
Time measurement accuracy
|
± 0.1%
|
± 0.1%
|
|
Internal resistance measurement range(mΩ )
|
0 ～ 600
|
0 ～ 600
|
|
Internal resistance measurement accuracy
|
± (0.5%FS+5 units)
|
± (0.5%FS+5 units)
|
|
Internal resistance measurement resolution
|
0.1mΩ
|
0.1mΩ
|
|
Temperature measurement range(℃)
|
-40 ～ 200(optional)
|
/
|
|
Temperature measurement accuracy and resolution(℃)
|
± 1, ± 0.01
|
/
|
|
Maximum steps number
|
25
|
25
|
|
Maximum cycles number
|
30000
|
30000
|
|
Number of test channels
|
16 cells or batteries
|
16 channels, each channel has 4 cells which are in same batch
|
|
Battery holder
|
Adjustable cylindrical cell holder
Four- wire spring fixture
Adjustable Height of fixture 0 ～ 100mm
distance between fixtures : 45mm
Each channel is provided with interface cable
|
Adjustable cylindrical cell holder
Four- wire spring fixture
Adjustable Height of fixture 20 ～ 90mm;
Distance between fixtures: 24mm
Each group is provided with an interface cable
|
|
Dimensions (mm)
|
500mm wide× 340mm deep × 750mm high
|
700mm wide× 400mm deep× 1000mm high
|
Remarks: according to customers' requirement, for BS-9300R equipment, range of constant current and test voltage is scalable.
Features:
l It is designed for use in the performance and life cycle test of lithium ion, Li-polymer, Ni-Cd/Ni-MH rechargeable batteries and cells. It is used by battery research and product test laboratories, etc.
L The equipment has 16 independent constant current source control circuits. Each circuit is completely independent; they can test 16 batteries & cells of different varieties and different standards simultaneously without interference. The charge and discharge process, charge and discharge current, and constant voltage value of each channel are set and controlled by computer
l It has AC internal resistance testing function which can provide circle internal resistance curves. You can test internal resistance at any time..
L Temperature testing model is optional, and it can test the batteries & cells temperature at any time
l Battery holder is adjustable cylindrical cell holder, with spring Four-wire fixture, it is easy to adjust and its contact is reliable; we also provide interface cables which are Four-wire terminated with circular connector for tester interface, alligator clips for the test of battery pack and positive and negative materials.
L The software’ s interface is friendly and the statistics function is powerful. During testing process, it marks the charge and discharge process condition graphically and shows battery voltage, charge and discharge time, charge and discharge condition, circle number and curves. You can inquire the charge and discharge data of each cell and battery. It can output the data on screens or printers in form of curve and table.
L You can set up 25 steps and 30000 circles in testing process. Each channel can save whole data and curves of experiments process.
L A computer can controls 1~8 set (s) of equipment at the same time.
L It can protect data when power fails and continue to run when power is restored.
L The equipment can work off-line. Each channel can retain test data of last 30 steps to most extent.
L