Product Main

Quick Details

Insulation Material: PUR
Conductor Type: Solid
Conductor Material: Copper
Application: Underground
Type: Insulated
Brand Name: shenglong
Place of Origin: China (Mainland)
working temperature: AC 300/500V

Specifications

 
 

watertight control cable

Used to connect the electricity equipments which worked under water environment. According to the signal transmission requirements, the cable could be multi-bunch stranded single core, multi-core and multi-couple core. According to the shielding grade, the cable could be single one-layer shielding, single 2-layer shielding, single layer general shielding, 2-layer general shielding. According to the operating requirement, the cable could be vertical watertight, horizontal watertight. 

Vertical watertight cable

Used as connection wire to wear storehouse on the ships where requires high reliability. The cable end face(axial direction) should bear water pressure. No water leak under the test pressure and time.

Horizontal watertight cable

Used under water but not to wear storehouse. The cable outer sheath (radial direction) should bear water pressure. No deformation, no insulation resistance decline under the test pressure and time.

Technical parameter

Water pressure

Vertical water pressure resistance

horizontal water pressure resistance

Water pressure grade

4.5MPa

6.0MPa

10.0MPa

10.0MPa

70.0MPa

Single wire core

Multi-strand tinned Cu wire twisted conductor; conductor section 0.12mm2-16mm2.twisting fill is water blocking glue.

Multi-strand tinned Cu wire or silvering Cu wire twisted conductor; conductor section 0.035mm2-16mm2

Multi-wire core

Multi-strand tinned Cu wire twisted conductor; conductor section 0.12mm2-16mm2. core NO is 2-91. single shield is tinned Cu wire braid. General shield is tinned Cu wire braid. Conductor twisting, braid, cabling fill is water blocking glue.

Multi-strand tinned Cu wire or silvering Cu wire twisted conductor; conductor section 0.035mm2-16mm2 core NO is 2-91. single shield is tinned Cu wire braid. General shield is tinned Cu wire braid. cabling fill is seal gum.

Multi-couple core

Multi-strand tinned Cu wire twisted conductor; conductor section 0.12mm2-16mm2. strand couple NO is 2-91. each couple shield is tinned Cu wire braid. General shield is tinned Cu wire braid. Conductor twisting, braid, cabling fill is water blocking glue.

Multi-strand tinned Cu wire or silvering Cu wire twisted conductor; conductor section 0.035mm2-16mm2 core NO is 2-91. each couple shield is tinned Cu wire braid or Al foil +tinned wire braid or Al foil + drainage thread. General shield is tinned Cu wire braid or Al foil wrapped + tinned wire braid. cabling fill is seal gum.

Working temperature

-50-80

Temperature resistance in short time

130, 2h low temperature sulfuration

Sheath material

PUR, RU

Sea-water environment

apply

Watertight test standard

GJB1916-94, GJB774-1989, MIL-DTL-24643