Product name: 125 Oil-proof XLPE Formula(RoHS)
Item: DEGC 1250N
Item: DEGC 1250N
Details:
125 Radiation Crosslinking Oil-proof Non-Halogen Flame Retardant XLPE Wire & Cable Compound
125 Radiation Crosslinking Oil-proof Non-Halogen Flame Retardant XLPE Wire & Cable Compound
1. Introduce
DEGC1250N is a non-halogen, low-smoke, flame-retardant, radiation crosslinking XLPE, low corrosive, and lowtoxic Oil-proof compound. It has been designed for general purpose medium and low voltage applications. Especially for rolling stock, automobile wire. If need. Standard color concentrates(EVA or PE based)can be used or we can provide directly color compound. The compound has the following features: Good physical properties, Good electrical properties, Highly flame-retardant, Excellent processability.
DEGC1250N is a non-halogen, low-smoke, flame-retardant, radiation crosslinking XLPE, low corrosive, and lowtoxic Oil-proof compound. It has been designed for general purpose medium and low voltage applications. Especially for rolling stock, automobile wire. If need. Standard color concentrates(EVA or PE based)can be used or we can provide directly color compound. The compound has the following features: Good physical properties, Good electrical properties, Highly flame-retardant, Excellent processability.
2. Processing Techniques
It has excellent processability, it'Draw-Down Ratio is greater than 2: 1. Pressure Die, Semi-pressure Die, Tube-on Die can be used. It can be processed with ordinary screw extruder with L/D=18-25\Screw compression ratio≤ 3: 1.
Recommended processing temperature:
110\140\155\160\165\160 Die
The above temperature can be adjusted according to actual situation, but generally not exceed 175.
Recommended radiation dose: 15-17Mrad.
*For more detailed information, please contact directly with our company
It has excellent processability, it'Draw-Down Ratio is greater than 2: 1. Pressure Die, Semi-pressure Die, Tube-on Die can be used. It can be processed with ordinary screw extruder with L/D=18-25\Screw compression ratio≤ 3: 1.
Recommended processing temperature:
110\140\155\160\165\160 Die
The above temperature can be adjusted according to actual situation, but generally not exceed 175.
Recommended radiation dose: 15-17Mrad.
*For more detailed information, please contact directly with our company
3. Product
Figure: Particle
Package: 25Kg/Bag
Figure: Particle
Package: 25Kg/Bag
4. Storage
It is recommended that all compounds be stored indoors and in their original unbroken package. This store area should be controlled to avoid wet
It is recommended that all compounds be stored indoors and in their original unbroken package. This store area should be controlled to avoid wet
| Property | Unit | Typical Value | Test Method | |
| Density | g/cm 3 | 1.50 | GB 1033 | |
| Tensile Strength | Mpa | 12.7 | GB/T 1040 | |
| Elongation at break | % | 160 | GB/T 1040 | |
| After aging 158× 168h | GB/T 2951 | |||
| Chang of Tensile Strength | % | +18 | ||
| Chang of Elongation | % | -12 | ||
| Immersed 20 # oil test 100× 70h | GB/T 2951 | |||
| Chang of Tensile Strength | % | -20 | ||
| Chang of Elongation | % | -19 | ||
| Immersed 0 # oil test 70× 168h | GB/T 2951 | |||
| Chang of Tensile Strength | % | -39 | ||
| Chang of Elongation | % | -44 | ||
| Immersed 20 # oil test 121× 24h | GB/T 2951 | |||
| Chang of Tensile Strength | % | -21 | ||
| Chang of Elongation | % | -19 | ||
| Hot set test(200, 0.2Mpa) | GB/T 2951 | |||
| Max elongation underload | % | 80 | ||
| Max permanent elongation after cooling | % | 2 | ||
|
Low Temperature Brittleness (-35) |
pass | GB 5470 | ||
| Volume Resistivity at 20 | Ω . m | 2.5× 10 12 | GB 1410 | |
| Dielectric Strength | Mv/m | 25 | GB 1408 | |
| Limiting Oxygen Index(LOI) | % | 37 | GB 2406 | |
|
Smoke Density |
Flaming | 65 |
GB 8323 |
|
| Non-Flaming | 105 | |||
| PH Value | 5.4 | IEC 754-2 | ||
| Conductivity | μ s/cm | 9.3 | IEC 754-2 | |
| Toxicity Index(NES) | 1.8 | NES 713 | ||