Product Main

Specifications

Product Details  
Zondaspraybooths are highly economical and reliable, provide spraying,accelerated drying or baking in one clean,fast operation.
Model:
750IIA
750IIB
750IA
750IB
Inside Dimensions:
7000(L)X4000(W)X2650(H) mm
Outside Dimensions:
8420(L)X4120(W)X3050(H) mm
8400(L)X4120(W)X3050(H) mm
Wall Panels:
prepainted steel sheet,double skined with insulations(EPS or Glass-wool),tongue and groove interlock construction,thickness:60mm
Doors:
2-fold main entrance door,2800(W)x2600(H) mm;One personnel door,800(W)x2000(H) mm
Basement and Floor:
Full concrete floor,no basement supplied,air extract from wall panels(standard extract from rear wall panels)
Intake:
One backward inclined turbo fan,
One double-intake centrifugal fans,
capacity:22000cmh,motor:7.5kW,direct drive
capacity:22000cmh,motor:7.5kW,,belt drive
Extract:
One backward inclined turbo fan,
One double-intake centrifugal fan,
capacity:22000cmh,motor:7.5kW,direct drive
capacity:22000cmh,motor:7.5kW,belt drive
By-Pass:
Pneumatic damper from spraying to baking cycle
Heating System:
Stainless heating exchanger,60-80 working temperature.RG5S oil burner from Riello,Italy.(gas burner optional)
Filter System:
3 sorts of filters:Prefilter,ceiling filter,extract paint-stop filter
Ceiling Filtration Area:
22m2
28m2
22m2
28m2
lighting:
Upper inclined lights
Side wall panel lights
Upper inclined lights
Side wall panel lights
10 units,4x36W each
10 units,4x36W each
10 units,4x36W each
10 units,4x36W each
Control System:
Reliable components,digital temperature readout,spray and bake temperature settings,bake timer,hour meter,
over temperature alarm,indicator lights,emergency stop,"Dwyer"mark II pressure gauge with manual damper control
Note:
1.C750 series only available for type 5 as extraction from wall panels.
2.Additional side lights optional(Vertical or horizontal installed)