- Power Supply: Input Power:100-240VAC, 50-60Hz, ; Output Power: 5.0VDC
- Optical Wavelength: 430~480nm
- Light Intensity: 1,200 m W/ cm2
- LED Power Consumption: 5 Watts
- LED Estimated Life: 50,000 hours
1. Light guide tip are made of aluminum alloy, is more tough than glass fiber and also not loss of light guide that will ensure our products low energy consumption and high light intensity, and increasing their using life.
2. Microcomputer operate system ensure light intensity more steady.
Efficient and safe battery protecting system(it’s power supply system has the function of preventing over discharge, over charge and short circuit). Low voltage indication and automatic turn off when the voltage is too low.
3. Design of almost none current stand by system, the stand by time is more then 12 months with fully charged. Directly charging system reduce efficiently the times of charging for the lithium battery and extend it’s using life. The charging type with USB connector suit any USB charger with the same parameter(same voltage and same current).
4. Various Curing Time: seven preset curing time 5/10/15/20/25/30/40 seconds.
Three operating modes: Fast, Ramp, and Pulse. Fast mode starts the unit on full power for the duration of the cure time set. Ramp mode gradually ramps the power up to full over 2 seconds, and then continues at full power for the remainder of the cure time set. Pulse mode pulses the light at full power for a second with a rest of 0.2 seconds for the duration of the cure time set.
5. Power failure memory function, that will save automatic the time and mode the user set before the power failure.
- Light Guide Tip 1 pc
- Eye Cap Protector 1 pc
- Base 1 pc
- USB Cord 1 pc
- Two-pin plug 2 pcs
- User Manual 1 pc