Standard Kit

DSLR Rig, DSLR Mount, Matte Box, Follow Focus, HDMI Moniter, Pro moniter Hood

Standard Kit included: DSLR Rig, DSLR Mount, Matte Box, Follow Focus, HDMI Moniter, Pro moniter Hood and so forth.

Professional Kit :

Follow Focus Kit

Baseplate system

Viewfinder

Double Handle

Shoulder Support

Magic Arm Grip

C-Shape Support

Matte Box

HDMI LCD 7”Monitor(without battery)

Pro monitor hood

Top Hand Grip

Security Case

 

 

This kit is for taking movie with DSLR, such as Canon 5D2, 7D, 60D, Nikon D7000, etc.

Here is the list of all accessories:

1. ABS security case:

You can put the whole kit in the case, and it is very strong, water-block.

2. Baseplate System:

Aluminum alloy.

Process: hard surface oxidation

Performance: XY axis many adjustable joints of X and Y axis can adapt to various HDSLR and HDV with high and low conversion card cases (for height conversion use)

3. Follow Focus Kit:

(one follow focus and 2 adjustable gear rings and 6 fixed size gear rings)

Materials: 90% aluminum alloys, 2% POM, 8% of stainless steel (screws, bearings, gears)

Process: hard surface oxidation

4. Matte box:

Materials: 95% aluminum-magnesium alloys, 5% stainless steel (screws)

Process: molds, hard surface oxidation, spraying of rubber oil.

Accessories: side door card cases, main part, back cover, four removable flag plate, two 4 * 4filter slots, two 4 * 4 filter rings, filters can be rotated.

Specification: front diameter 210mm * 150mm, maximum diameter of back-end 110mm, to the downwards matching with different block-rays according to different bores. Front to back distance of 65mm, it can be connected to ultra-wide-angle lens. Performance: Quick release lock design, rapid side door for quick replacement of lens. Filter rings can be rotated to facilitate installing polarizing filters.

5. Double Handles

Material: 70% aluminum alloys, 28% plastic, 2% stainless steel

Process: hard surface oxidation, plastic molds. Accessories: four-hole card cases, double hand grip, single horizontal rail.

Specification: 300mm adjustable horizontal spacing for rails, adjustable 360 degree angle for front and back. Performance: Growth handheld components can better improve arm fatigue because of the balance causes. Ergonomic handle is adjustable to one-hand operation.

6. C-shape Support

Material: 90% aluminum alloys, 10% stainless steels

Process: hard surface oxidation

Performance: connect Top Hand Grip and Supporting system and other accessories together

7. HDMI LED Monitor

7/8/10inches without internal battery( extra battery is available), and we also have 7inches with internal battery.

Display screen:7\ 8\10 inches LED/LCD

Pixel: AV input 800 × 480 (1,152,000) pixels, HDMI input 1920X1080.

Color format: PAL-4.43 NTSC-3.58

screen ratio: 16:9

Contrast Ratio: 500:1

Brightness: 450cd/m2

Viewing Angle: 120 (up / down), 140 (left / right) HDMI Input: 1 Weight Input: 1 AV Input: 1 (Internal Battery ones: 2200 mAh Li battery, 3 hours battery endurance)

Input voltage: DC 11-13V Power consumption: ≤ 8W Specification (mm): 188 (L) × 129 (W) × 40 (H)

7inches monitor with internal battery:         7inch monitor with external battery and magic arm:

8. Professional Monitor Hood

Specification: 7, 8, 10inch and extended edition is available

Material: PP Plastic sheet outside, black flock inside

Profile: Professional design, Well Shielding Effectiveness , Easy to install, International Patents PCT

9. Magic Arm

Material: 90% aluminum alloys, 10% stainless steels

Color: red / black Process: hard surface oxidation

Performance: to full, universal adjustment of LCD position, a key to lock the joint design. It can be connected to the tubes of 15MM of the suite.

10. Top Handle

Materials: 95% aluminum alloys, 3% plastics, 2% stainless steels

Process: molds, hard surface oxidation

Accessories: L-type upper pole of side rotation, lifting part of the dual 250mm standard mounting rail, the middle of open joints.

Performance: the upper lifting component is completely solve the problem of low film, unique quick turn function to facilitate the rapid replacement of the lens when shooting.

11. Shoulder Support

Material: 80% environmental rubbers, 18% aluminum alloys, 2% stainless steel (screws)

Process: molds, hard surface oxidation

Accessories: card cases, clevis, main part pf a shoulder Performance: super soft main part, it can be comfortably attached to the shoulder that is hard to slip.

12. Viewfinder

It provides much improved viewing over stock view-finders, especially if you only have the LCD monitor to compose shots with, it allows a great deal more light to come through, resulting in a crisper, clearer, brighter image, pushing the viewfinder gently against your eye provides a third point of contact and, therefore, greater stability.

13. 2pcs HDMI Cable

Special cable for camera to monitor. The right-angle design can effectively protect the port of your camera. And the 55cm length is also for the convenience of user.

14. 4pcs wire

Special elastic wire, red ones are for high voltage, yellow ones are for low voltage, to protect your cameras and monitors from being burned. And it can be stretched to 1.5m.

15. Pro tools