Product Main

Specifications

Stainless Steel Wire Mesh Description:

Our stainless steel wire mesh products are generally made of stainless steel Type 302,304,304L,316,316L,321 and 430 etc. We produce wire cloth in all kinds of forms. The weaving is determined according to our customers'specific requirements, such as the material, the wire diameter, the size of the mesh , width and length.

Stainless Steel Plain Weave

This is used for the majority of wirecloth woven by Potter & Soar. Each warp wire crosses alternately above and below every weft wire and vice versa. Warp and weft wires are normally of the same diameter. Used for the majority of commercial applications and for filtration where a high flow rate is required.

Stainless Steel Plain Dutch Weave
General Introduction: Woven patterns applied for stainless steel wire mesh or wire cloth can be plain weave, twill weave, Dutch plain weave or Dutch twill weave, while square woven wire mesh is made by either plain weave or twill weave. Woven wire mesh with equal mesh count horizontally or vertically has square opening, hence also called square opening wire mesh, or single layer wire mesh.

Stainless Steel Twill Weave
Stainless Steel Wire Mesh,Stainless Steel Dutch Wire Clothand Nickel Wire Mesh, especially woven wire mesh with extra roll width. Major wire materials for stainless steel wire mesh is stainless steel 302, 304, 304L, 316, 316L, 2520, 2080; mesh count of square opening stainless steel wire mesh normally ranges from 40mesh to 400mesh.

Stainless Steel Dutch Twilled Weave
 
Dutch Twill Woven Wire Cloth offers higher strength than regular Dutch woven wire cloth. It packs even more wires in a given area than Dutch plain woven wire cloth. Generally, Dutch Twill Woven Wire Cloth offers finer mesh counts and lower flow than other Dutch Woven Wire Cloth and can be made to filter particles as fine as 2 microns in diameter.
 
Specification List of Stainless Steel Wire Mesh
Mesh/Inch
Wire Diameter(mm)
Aperture (mm)
Filtration Area%
Mesh/Inch
Wire Diameter(mm)
Aperture
(mm)
Filtration Area%
2
1.60
11.10
76
80
0.13
0.187
35
3
1.60
6.87
66
100/90
0.10
0.167
39
4
1.60
4.75
56
100
0.10
0.154
37
5
1.00
4.08
64
100
0.11
0.144
32
6
0.90
3.33
62
120
0.09
0.122
33
8
0.90
2.28
51
120
0.08
0.132
39
8
0.70
2.47
61
150
0.065
0.104
38
10
0.50
2.04
64
200
0.05
0.077
37
12
0.50
1.62
59
200
0.04
0.084
47
14
0.50
0.50
52
250
0.04
0.062
37
16
0.35
1.24
61
250
0.035
0.067
43
18
0.28
1.13
64
250
0.03
0.072
50
20
0.35
0.92
52
300
0.04
0.045
28
24
0.35
0.71
45
300
0.03
0.055
42
28
0.35
0.56
38
325
0.035
0.043
30
30
0.28
0.57
45
325
0.028
0.050
41
40
0.22
0.42
43
400
0.030
0.034
28
50
0.18
0.33
42
400
0.023
0.042
43
60
0.16
0.26
39
508
0.025
0.025
26
70
0.14
0.223
38