Pin Code reading device for Chrysler ( TYPE2)

Read data from Immobiliser controler and show the pin code on the screen of the device directly

1: Removing the IMMO box from the vehicle.The location is on the Ignition Lock.

2:Desoldering the two pins  of coil connection and removing the circuit from box.

3: To find an EEPROM "24LC02B"

4: Clear every  pin of 24LC02B connect the clips with  microchip,Black  point to  pin1  of 24LC02B.

5:Then press "Read Pin'button on the unit , The  screen will show the "pin code".

Another  way for reading pin code:
There is another cable(4wires) which comes with  reading unit  ti read the pin code without desoldering and removeing the circuit from  the IMMO box.

White wire to Point1 , Black wire to point2,Blue wire to Point3 Red wire to point4

Then Press"Read Pin"button on the unit,  The screen  will show the      "Pin Code".