QAM Modulator
Outline
In the broadcasting process of digital TV programs, QAM modulator mainly complete QAM modulate and up-frequency conversation process for TS stream, Apply to multi-level transmission, broadcasting of digital TV business.
QAM modulator mainly used in head end of digital TV broadcasting, it is composed by two modules QAM modulator and digital up-frequency conversation, modulate the input serial or parallel TS stream via the QAM modulator module, modulate to IF frequency, then pass the up-frequency conversation module to frequency transform, into standard channel or supplement channel which meet demand. Finally mixed enter into CATV network, and received by the terminal STB.
Features
* Support IYU-T. 83A
* Error correct encode completely meet DVB-C standard
* Be workable under QPSK, 16QAM, 32QAM, 64QAM, 128QAM, 256QAM mode
* Input interface: ASI and SPI (DS3/E3 optional)
* Input date bit rate range: 1.5~51.6Mbps
* Output data bit rate range: 2~56Mbps
* Output signal Bandwidth(BW) range: 1.15~8.05MHz(roll down coefficient is 0.15)
* Output data symbol rate range: 1~7Mbaud/s
* RF frequency range: 110~862MHz
* Output level range: 95dBuV~115dBuV (stepping -0.5dB/step adjustable )
* 188/204 packet length adaptable itself
* Adopt big enough cache design, ASI interface support paroxysmal and symmetrical input TS stream, and can equilibrate and reforming the TS stream, enhance the efficiency of output TS stream.
* Input data empty packet filtering and output data fill in.
* PRC proofread function, can accurately correct several PCR of input data separately.
* Real time inspect and display for the efficient TS stream.
* Adaptable itself to filtering circuit design to ensure the excellent suppress capability out of band.
* -20dB RF test mouth to monitor IF output.
* Fault alarm display
* LCD screen display
* Network control interface, make centralize management, remote upgrade and maintenance (network management software only for option)
* Power-off memory
Specifications:
Input interface | ASI and SPI (DS3/E3 optional) | |||
Input date bit rate range | 1.5~51.6Mbps | |||
Output data bit rate range | 2~56Mbps | |||
Output signal Bandwidth(BW) range | 1.15~8.05MHz(roll down coefficient is 0.15) | |||
Output data symbol rate range | 1~7Mbaud/s | |||
RF frequency range | 110~862MHz | |||
Output level range | 95dBuV~115dBuV (stepping -0.5dB/step adjustable ) | |||
ASI interface (Asynchronous Serial Interface) | Input | Socket: BNC | ||
Impedance: 75Ω | ||||
Packet format: 188 or 204 byte(no route encode) | ||||
Route data speed velocity: 270Mbps | ||||
Max efficient data: 51.6Mbps | ||||
Standard: meet DVB standard, support paroxysmal and symmetrical input TS stream | ||||
Ring route output | Socket: BNC | |||
Impedance: 75Ω | ||||
SPI Input Interface (Synchronous Parallel Interface) | Socket | DB-25 female | ||
Packet format | 188 or 204 byte(no route encode) | |||
Standard | compatible of DVB, LVDS working methods | |||
IF Interface | IF output | Linker: BNC socket | ||
Impedance: 75Ω | ||||
Center frequency: 35.000~44.000MHz adjustable (stepping 125KHz) | ||||
IF bandwidth: ≤ 8MHz | ||||
Return loss: ≥ 18dB | ||||
Input level: 100dBuV | ||||
RF Interface | RF output | Connector: F jack (the metric system) | ||
Impedance: 75Ω | ||||
Output frequency: 110MHz~862MHz (provide per model) | ||||
Return loss: ≥ 12dB | ||||
Output level: Max 115dBuV(adjustable, stepping at 0.5dB) | ||||
Level adjustable range: 0~20dB | ||||
Carrier suppression: > 55dB | ||||
Modulate error rate(MER): ≥ 32dB(closing balance), ≥ 45dB(opening balance) | ||||
Bit modulate error rate(BER): ≤ 1*10-8 | ||||
SNR(Outside band): ≥ 50dB | ||||
RF test output | Connector: BNC | |||
Impedance: 75Ω | ||||
Output level: 75dBuV~95dBuV (adjustable) | ||||
Signal channel coding | Modulate mode | 16QAM, 32QAM, 64QAM, 128QAM, 256QAM | ||
Channel coding | comply with DVB standard RS coding | |||
IF modulate error rate(MER) | ≥ 44dB | |||
SNR(outside band) | ≥ 50dB | |||
Network administration interface | Ethernet interface | Ethernet IEEE802.3, RJ45interface | ||
Software agreement | the SNMP agreement | |||
Power supply |
Voltage | 110~220VAC | ||
Frequency | 50/60Hz± 2% | |||
Electric Power | 20W | |||
Working environment | Surrounding temperature | +5° C~45° C | ||
Storage temperature | -25° C~+55° C | |||
Relative humidity | 10~75% | |||
Radiate and safety requirements | Comply with GB13837-92 and GB8898-88 standard | |||
Dimension | 44.5mm(height, 1U)× 483mm(width, 19″ ) × 330mm(deep) | |||
Weight |
3.5 kg |