| Place of Origin: | China (Mainland) |
|---|---|
| Brand Name: | MYJG |
| Model Number: | MYJG-60W |
| Output Power: | 60W |
| Output Type: | Single |
| Input Voltage: | 220V |
| Output Voltage: | 35KV |
| Output Frequency: | 47-440HZ |
| Output Current: | 23mA |
| Laser Type: | Co2 |
Quick Details
Specifications
60W Laser Power Supply Main Features:
1. This laser power supply adopts zero current and half bridge soft switch circuit, it makes the power supply have high efficiency and quick response speed, Thus it is easy to match with Co2 laser tube made by any factories.
1. This laser power supply adopts zero current and half bridge soft switch circuit, it makes the power supply have high efficiency and quick response speed, Thus it is easy to match with Co2 laser tube made by any factories.
2. This laser power supply is easy to be controlled, it is suitable to High or Low level signal. The TTL level can control start or stop of laser output. While the power supply has emergency protection switch which can indicate water through and ventilation.
3. The laser output power can be adjusted by 0-5V analog signal or PWM signal.
4. This laser power supply has open circuit protection function. When protective earthing is good, the laser power supply has open circuit protection function. When protective earthing is good, the laser power supply can be in open circuit status during short time. So that can avoid because of laser tube burst caused by laser power supply.
5. Aging test:
Each laser power supply must pass this test which is taken at 60 degree centigrade for 12 hours in full load status, and the power supply must start and stop at each 7 seconds for 500 times. In this way we can ensure the power supply is qualified.
Main Technical Parameters:
|
AC Input Voltage
|
AC220V or AC110V
|
|
|
DC Input Voltage
|
DC300V or DC150V
|
|
|
AC Input Frequency
|
47~440Hz
|
|
|
Voltage Output
|
35KV
|
|
|
Maximum Current
|
23mA (depending on the laser tubes of different manufacturers)
|
|
|
Efficiency
|
91%
|
|
|
Overcurrent Protection
|
130% of maximum current
|
|
|
Open Circuit Protection
|
Yes(short term)
|
|
|
Structure
|
Fan cooling
|
|
|
High Electric Level Control Voltage Range
|
≥3V
|
|
|
Low Electric Level Control Voltage Range
|
≤0.8V
|
|
|
Working Temperature
|
-30℃~+65℃
|
|
|
Relative Humidity
|
20~85%RH (no condensation)
|
|
|
Voltage Resistance
|
Input—Output
|
AC1500V1minutes ≤10mA
|
|
Input—Shell
|
AC1500V1 minutes ≤10mA
|
|
|
Output—Shell
|
Connection
|
|
|
Insulation Resistance
|
≥50MΩ(DC500V)
|
|
|
Earth Leakage Current
|
≤1mA(AC220V)≤0.5 mA(AC110V)
|
|
|
Vibration Resistance
|
Amplitude: 0.5mm frequency 10~55Hz 3D direction 2 hours
|
|
|
MTBF
|
≥30,000hours
|
|
|
Test Time at Full Load and 60℃
|
12 hours
|
|
|
Power Supply Switch Test within 7 Seconds
|
500 times
|
|
|
Maximum Dimensions (L*W*H)
|
205mm*170mm*95mm
|
|