The RFID magnetic-mount antenna (Part Number:RFID-BH01) comes with a strong self-adhesive magnet pad which can be easily be replaced by an automotive grade double-sided adhesive pad to support permanent installations or installations on non-metallic surfaces. The cable length (up to 5 m/16.4 ft) of the LMR200 low-loss cable and connector type can be customized to meet the customer’s needs within the limits of the RFID requirements. It's gain can get up to 3dBi.

 

RFID passive antenna

One. Dielectric antenna specification
1.Patch antenna chip:36X36X4mm
2. Frequency range:850-960MHZ,2400-2500MHZ
3. V. S. W. R 1.5:1
4. Band width 2 MHZ
5. Attenuation fo+/-100mhz>30db
6. Impendence 50 ohm
7. Peak gain >3dbic based on 7*7cm ground plane
8. Gain coverage >-4dbic at -90<0<+90(over 75% volume)
9. Polarization rhcp

Two. Mechanical specification

RFID-BH01

 1. Weight <300gram
2. Size .63*63*16mm
3. Cable LMR200/U 3m or 5m cable
4. Connector :SMA  male straight Others 
5. Mounting base: Magnitec
6. Housing black 

 

Three. Environmental specification
1. Working temp -40~+85
2. Storage temp -40~+100
3. Vibration sine sweep 1g(0-p)10~50~10hz each axis
4. Humidity 95%~100%rh
5. Weatherproof :100%
6. Mtbf=1*10-6/pc. Hr 40+/-5 dc=5.0v+/-0.5v 2000pcs for 480