Product Main

Quick Details

Place of Origin: China (Mainland)
Type: Electric
Use: Standard Battery
Model Number: EP-3PN3020MP
Brand Name: EVERPOWER
Output: 16V~1.8A or 0.9A
Protection: OVP/OCP/Short circuit
charger mode: MCU control dV=5mV/Cell
size: 117*61*37mm

Specifications


16v 1.8a full automatic charger for 10s nimh pack---model:EP-3PN3020MP


 

                              *Prefect for charing 7S~10S all nimh battery 5~12Ah*  

Features and Benefits

  • Best and fast Charger for charging all RC Car, RC Airplane and Airsoft battery packs 7.2v, 8.4V,9.6V,10.8V,12V
  • Universal for any NiMH /NiCd battery packs 7.2V - 12V (6-10 Cells Pack)
  • Smart Charger with automatic voltage detection
  • Use pulse and negative pulse technology to avoid battery overheating during fast charging, optimized for battery pack's cycle life
  • Selected double output charging current for charing any nicd nimh battery packs capacity from 300mah~20000mah
  • Automatically charging ending with negative delta V
  • Worldwide usage with 120-240V AC

Smart Charger Specification

  • FOR 7.2V-12 NiMH/NiCD Battery Packs 6-10Cells Packs
  • Input: AC 100-240V
  • Output: 16V~1.8A or 0.9A
  • Call us to know more details datasheet

Operation Instruction

  • Connect battery pack to output connector and plug AC power source
  • Make sure battery polarity is connected correctly (Red wire is positive)
  • Charger will detect battery voltage automatically, Red LED will be on during charging
  • When battery is fully charged, current will reduce to trickle charging at 50mA, Green LED will be on
  • Battery will be charged at 1.8A constant current
  • Approximate Charging time is about 1.5hrs for 3000mAh battery,
  • The charger is designed for faster charging NiCd and NiMH battery packs from 7.2 to 12V for RC car/Air and Air soft gun
  • Don't charge battery packs with voltage less than 7.2V or greater than 12V and capacity smaller than 300mAh or larger than 30000mAh
  • Battery pack must be made by high drain current cell
  • Please contact your seller for instruction. Mfg is not responsible for any damage and consequent damage by Misuse.

Caution

  • The charger is designed for indoor use only. Don't leave the charger unattended during charging.
  • The Charger should be positioned horizontally and work in well ventilated condition, avoid water and keep away from flammable explosive goods.
  • Don't cover the charger when charging, ambient temperature shall not be more than 40oC
  • Don't touch the plug.
  • Don't leave the batteries and chargers on wood surface or carpet.
  • Cut off the power supply before connect or disconnect the charger with batteries.
  • Don't try to disassemble the charger; High voltage inside!