FDP Series Hydraulic Directional Drilling Rig is special equipment, mainly used for the civic construction. It can drill through ground buildings or underground bars (such as highways, railways, rivers, buildings and underground obstacles, etc) for the laying of the diversified pipes under the diameter 750mm. FDP series have been successfully used for laying of protective casing for optical fiber cables, communication cables, water supply popes, sewer, etc. in the cities of China. The mainly characteristics are high precision of laying position(the direction and depth of the hole can measure or control while drilling); Long distance for a laying; The advantages over the trenchless method are convincing: high efficiency, low cost, and less impact on the environment.

Application field
The drill is mainly used for trench less method for laying of the cables of electricity, communication;
For horizontal precipitation engineering.
For environmental protection (To dispose the contamination to avoid it leakage).
For long distance popes supporting engineering.
For special base engineering and for pilot-hole of push pipe engineering , etc.

Host engine is moving association of wheeled model or little track. Power Rated thrust and pullback force are 150KN , Drill drive is big torsion and high efficiency to work, form 300m high strength pliable and tough drilling rods. It's applicable for urban area , suburb and multifarious working environment tasks.

 

Max push capacity	75KN
Max pull capacity	150KN
Rated torque	4200 N.M
Max torque	4200 N.M
Rated speed	Lower 5-60r/min
	High 50-120r/min
Feed travel	3500 mm
Drilling angle	0-20°
Length of pull backward	300 m
Diameter of guide hole	76 mm
Max diameter of reaming	480 mm
Pressure of hydraulic system	20-25MPa
Power of drill (diesel engine)	66 kw
Weight	6100 kg
Dimensions (L×W×H)	5800×2050×2380
Move mode	Moves with track