Our company is the leading of producing yokohama type pneumatic rubber fender in China, and all the procedure is accorded with ISO 17357. The pneumatic rubber fender is widely used in marine shipping industry as the protective medium against the collision when ship-to-ship and ship-to-berthing.

Characteristics of pneumatic rubber fender:
1. Using compressed air as daming medium, the rubber fender can transform flexibly under pressure, with large contact area, small reaction and absorb large amount of energy.
2. When berthing, the ship is almost at a certain angle, the pneumatic rubber fender can realize contact in a certain angle by bringing full play to its performance.
3. Floating on the water surface, even the ship fluctuate and sway resulting from ebb and waves, the Pneumatic rubber fender bears less friction, which would be no harm to coating surface of ship and rubber fender.
4. Simple installation, siply installed on the wharf and anchor mast.   

Diameter	Length	Intital pressure(Po) is 0.05MPa			Intital pressure(Po) is 0.08MPa
		Weight kg	Reaction force (KN)	GEA (KJ)	Weight kg	Reaction force (KN)	GEA (KJ)
300	500	10	23	1.3	10	30	1
	600	15	27	1.5	15	36	2
500	800	25	60	6	25	80	7
	1000	35	75	7.5	35	100	9
800	1200	180	144	22	180	191	28
	1500	200	190	280	200	240	35
1000	1500	140	226	41	140	286	53
	2000	170	301	55	170	381	71
1200	2000	200	361	79	200	458	103
	2500	240	427	102	240	554	140
1500	2500	300	565	155	300	711	200
	3000	350	671	186	350	284	160
2000	3500	650	900	1050	650	1340	501
	6000	950	1800	660	950	229	859
2500	4000	1100	1510	688	1100	1900	889
	5500	1350	2076	946	1350	2610	1220
3000	5000	1700	2250	1250	1700	2860	1600
	6000	2000	2583	1485	2000	3292	1888
3300	4500	1800	2240	1350	1800	2820	1740
	6500	2250	3230	1950	2250	4070	2520
4500	7000	3250	5270	3180	3250	5980	5040
	9000	4950	6120	5050	4950	7960	6480