Detailed Product Description
Reinforced Bending Line: Having anti-pull reinforced with longitudinal uniform distribution (It depends on consumers to choose voluntarily whether adding)
Glass Fiber: Adopting Taian high- quality glass fiber, the content no less than 30%.
Unit Weight: 1800g/m² 2400g/m² 3050g/m²
Nominal Thickness: 1.2mm 1.5mm 2.0mm
Heat Resistance Limit: -80 to +130
Light Transmittance: 75%±2% ( light green) 53%±2% (cream white)
Anti- ultraviolet Rate: 99.9%
Tensile Strength: 100Mpa
lexural Strength: 180Mpa
Cracking Elongation Rate: 1.9%
Pasture Hardness: ≥50
Thermal Expansion Coefficient: 2.2×10¯5cm/cm/
Thermal Conductivity: 0.18w/m° k
Warranty:15 years
The Technical Standard of High-quality FRP
1.Good tenacity. No cracking phenomenon when driving nails in roof installation
2.Having close combining with color steel plate. Cross- section thickness is uniform. The shape of FRP is
consistent with steel plate.
3.Transmittance loss rate is low. No yellowing phenomenon after long term service.
4. Thermal expansion coefficient is close to that of steel plate. No cracking and water leakage in nail driving place
because of expand with heat and contract with cold.
5.Light through FRP assumes scattering shape and gentle.
6.Bright and clean appearance, no distinct air bubble and cracking on FRP.
7.water-proof and damp-proof, anti-corrosion
8.FRP cure degree acuity≥ 85%.
9.the oxygen index of Anlite FRP ≤21% ,Belong to inflammable.
10.By setting in -40°C~95°C does not be aging, yellow, crack or softening.
11.By the use of FRP setting animals and plants greenhouse daylighting;workshop and civil building roof, metope daylighting, such as workshop with daylighting, hotel hall, gymnasium, swimming pool, parking lot;
12.FRP board, the application of metope daylighting greatly reduces the use of aluminium window construction cost.