Detailed Product Description
Besco Metal Slitting machine/metal precision slitting machine/metal slitting line
:
1, Easy operation.
2, High precision.
3, ISO 9000:2001 certification.
4, Customerized
Metal Slitting machine/metal precision slitting machine/metal slitting line
:
1, Easy operation.
2, High precision.
3, ISO 9000:2001 certification.
4, Customerized
A. Techincal parameters of Metal Slitting machine/metal precision slitting machine/metal slitting line
| Specification | Parameters |
| Materials of Coiled Plate | Carbon Steel |
| Thickness of Coiled Plate | 2-6 mm |
| Width of Coiled Plate | 500 mm |
| Coil Inner Diameter ( input) | ø 460- ø 520 mm |
| Coil Outer Diameter | ø 1500mm |
| Coil Inner Diameter (output) | ø 480- ø 508 mm |
| Max. Weight of Coiled Plate | 10T |
B. Equipments of Metal Slitting machine/metal precision slitting machine/metal slitting line
1. Charging Wagon 1 set
2. Hydraulic Decoiler 1 set
3. Conveying Bridge/Feeding Device 1 group
4. Position Correcting Device 1 set
5. Slitting Machine 1 set
6. Independent Scrap Recoiler 1 set
7. Loop Bridge 1 set
8. 3 Roller Tension Station 1 group
9. Partition Device/ Hydraulic Recoiler 1 group
10. Discharge Wagon 1 set
11. Hydraulic System 1 group
12. Electric System 1 group
13. Supplied Accessories 1 group
Equippments explanation of Metal Slitting machine/metal precision slitting machine/metal slitting line
:
:
1, Charging Wagon
A. Composition: steel plate, wheels, four guide column, transmission shaft, etc.
B, Overload 10T, with 1.1KW cycloidal needle motor, move 6m per minute,
C, Hydraulic power: lift weight is 10T, lift height is 1800mm, with hydraulic cylinder: one FA-Φ125mm.
2, Hydraulic Decoiler
A. Composition: steel plate, four arc plates, slider, spindle, side plate, bearings.
B. Expansion diameter: Φ460mm~Φ520mm×650mm, loading capacity 10T, pneumatic disc brake.
C. Oil pressure power: push-pull expansion mandrel. Oil pressure cylinder: FA-Φ150mm ( 1 set ).
D. Motor power: 5.5KW cycloidal needle motor with chain transmission.
3.Conveying Bridge and Feeding device
A. Composition: steel plate, bearing block, gear transmission, 3 straightening rollers, two feeding rollers, electric synchronism up and down, clutch, etc.
B. Loop Bridge: oil cylinder: CA-Φ80mm (1 set).
C. 3 Straightening Rollers Φ120mm×650mm, Two Feeding Rollers:Φ120mm×650mm, oil pressure up and down, with 15KW speed adjust motor and 400 mode reducer, with clutch.
4. Position Correcting Device
A. Composition: Steel plate, Rollers, PU rubber roller, etc.
B, Material of side roller: Cr12MoV, after high frequency quenching hardness, grind, chrome plated
5. metal slitting machine
A. The slitting line is composed of steel plate, synchronous gearbox, cardan shaft transmission, spiral up and down, with cultch, etc.
B. Material of blade shaft, 40Cr,Φ180mm×1600mm, after high frequency treatment, with chromium plating after refine, the blade slot is 20mm.
C. Diameter of blade is Φ350mm (equipped by buyer)
D. Lock of the blade shaft: the blade is locked close by screw nut.
E. One group of pressure plate adjustment device.
F. The blade seat is moved by synchronous motor power.
G. Manual side guide.
H. Power of shearing: 37KW motor with DC motor manual side guide.
6. Scrap Recoiler
A. Main composition: welded by steel plate, guide rollers, etc.
B. Recoiling both tow sides, with expansion, 60T torque motor.
7. Loop Bridge
A. Composition: welded by steel plate.
B. Oil pressure power: the up and down of loop bridge, oil cylinder: CA-Φ63mm (1 set)
8. 3 Roller Tension Station
A. 3 roller tension: Welded by steel plate, the tension roller use 45#, after heat treatment, two of Φ155mm*650mm. One ofΦ250mm*650mm, with manual brake, oil pressure push, oil cylinder: FA-Φ80mm (2 sets)
9. Partition Device/ Recoiler
A. Composition: steel plate, partition rollers, main shaft, arc plate, sliding block, bearing , bearing block, push and pull cylinder, box reducer.
B. ExpansionΦ470mm-Φ508mm, oil cylinder: FA-Φ150mm (1 set).
C. Electric power: 75kw DC motor.
10. Discharge Wagon
A. Composition: steel plate, wheels, four guide column, transmission shaft, etc.
B, Overload 10T, with 1.1KW sycolidal needle motor, move 6m per minute,
C, Hydraulic power: lift weight is 5T, lift height is 500mm, with hydraulic cylinder: one FA-Φ125mm.
11. Hydraulic system ( 1 set )
A. Composition: oil box weld by steel plate, capacity: 200kg, and oil pressure valve, circuit block.
B. Power: E class 7.5KW vane pump, oil pump capacity: 30ML, normal pressure: 70kg/ cm2 , maximum pressure:140kg/cm.
12. Electric System:
This production line uses 3 phase 380V, 50HZ
All kinds of motor: DC control system and main control box, etc.
All kinds of switches, electric control valve, wire circuit.
13. Supply Accessories:
A. Layout the fundamental of the installation of the machine.
B. The Layout of the bolts and the slitting line distribution.
C. Accessories: 15 recoiler partition pieces ,15 tension pieces, 80 recoiler meson, 80 tension meson.
14. The factory supply
A. Electric 380V, 3 phase.
B. The foundation bolts for installation and the connect wire between the devices.
C. The installation of the line is form to
Terms of payment of metal slitting machine
By T/T, 30% as deposit and the balance 70% before shipment.
Delivery date of aluminum coil slitting machine
110 days
Installation of metal slitting machine
--- 1 year guarantee for spare parts is included in quotation.
--- The operator training in our factory is free.
--- The technician could be sent for installation and operator training at site, but the fee should be discussed separately.