SPJ-RH low-sulfur diesel lubricant
Brief introduction
With the rapid growth of the number of cars and the quality’s improve, the quality requirements of fuel become more sophisticated. With the introduction of China’s new fuel standards, the sulfur content’s limits of gasoline reduced further, but the reduction will reduce the lubricating of oil, and this will increase the vehicle engine’s wear. When diesel fuel sulfur content is less than 500ppm, the jet pump will easily break.
This product can solve these problems well. The product has good compatibility with diesel fuel and lubricating oil. The product is miscible with diesel fuel, has no emulsification, and will have no settlement and residual in a multi-line system.
Technical parameter
|
Item
|
Parameter
|
|
Appearance
|
Colorless transparent liquid
|
|
Density (15℃), g/cm3
|
0.90-0.95
|
|
Kinematic viscosity(15℃), mm2/s
|
≤50
|
|
Solidifying point(℃)
|
≤-5
|
|
Flash point(open system), ℃
|
≥120
|
|
Acidity, mgKOH
|
≤200
|
Usage
Dosage is 100-200ppm usually. The product can be added into diesel fuel directly.
Packing and storage
1. Packed in 200L galvanized pail, net weight is 170kg.
2. The product should be stored in cool, dry, ventilated warehouses.
3. Guaranty period is one year.