The wide range of jet pump in the CAM series satisfied the most varied requirements with features such as:
- high heads with respect to power required.
-flat operating and power absorption curves, giving
moderate curve variations with respect to large variations in
delivery demand.
-high tolerance of the presence of entrained air in the fluid to
be pumped.
-suction capacity up to 9 meters
PERFORMANCE RANGE
Flow rate up to 100 l/min (6.0m³/h)
Dynamic head up to 65m
OPERATING LIMITS
Suction lift up to 9 m
Fluid temperature up to + 50℃
Maximum ambient temperature +40℃
WARRANTY: 1 YEARS
PUMP BODY   Cast iron
FRONT COVER   Cast iron
EJECTOR UNIT   Techno Polymer (approved For Drinking Water)
IMPELLER   Centrifugal Radial Flow In Brass Or Technopolymer (approved For Drinking Water)on Request.
MECHANICAL SEAL  Ceramic and graphite
MOTOR:
The Pumps Are Coupled Directly To An Asynchronous, High Efficient SILVER ELEPHANT Induction Motor Of Suitable Size,
which Is Quiet Running, Closed And Extremely Ventilated, Suitable For Continuous Duty. Insulation Class B.
The thermal cutout relay (motor protector) is incorporated in single phase motors.
Three phase motors require an adequate external motor protector, with connections according to current standards.
INSULATION   Class B
PROTECTION   IP44
CONSTRUCTION AND SAFETY STANDARDS in compliance with IEC.