Characteristics
High speed, under the normal circumstance, preparing the material and welding need 5 workers, and divided 10 worker into two group,so that the capacity can reach more than 20(the length is 12m). It has a high working efficiency.
processing quality is stable and reliable, Due to the use of mechanical operation, the distance between the main bar and rolling bar are uniformity, and the diameter of the steel bar cage is uniformity, The quality of the products can reach the specification requirements save time and material.
Precision safeguard
Because of the high demand of the stirrup accuracy, general welding machine can not do this work. But for this machine, it adopts PLC control system, guaranteed the drawing and rolling speed, so the spaces between the stirrup are stable.
Accessorial part: inner reinforcing bending machine, straightening& cutting machine, wire coils, general welding machine, co2 welding machine, electric control cabinet.
Material: ribbed bar, general bar
Main parameter:
|
Diameter: rolling bar:6-16mm
Main bar:12-32mm
Inner reinforce bar:12-32mm
|
Electric motor::3kva*2 rolling system
3kva*1moving/ drawing
5.5kva*1hydraulic station motor(support the product)
|
|
Rolling bar aperture:50-500mm(adjustable)
|
Wire feeding way: the main bar should be pre-cut, manual feeding.
(its quantity and diameter decide the mould you choose)
The rolling machine: feeding from the coils.
|
|
Cage diameter:300-2500mm
|
Length of cage:≤18m(6,12,18m)
|
|
Support system: 6 hydraulic support
|
output:10/d or 1/h
|
|
Adopt PLC(Panasonic) HMI
|
Need 5-6people to control
|