Product Introduction:
Cutting edge is the major ground engaging working part of the Dozer, mainly used for bulldozing and smoothing the construction area, joint by end bit bolt with the dozer. According to different application situation, dozer consists of small-sized, medium-sized and large-sized type, also made of three different materials.
Dozer end bit is installed on the two sides of the cutting edge, used to touch the ground, with the cutting edge to become the whole set cutting edge assembly. The end bit of large-sized dozer is installed by the way of making the end bit with the cutting edge becoming an acute angle. In the process of frayed, it always keep the acute angle.
Cutting edge is the major ground engaging working part of the Dozer, mainly used for bulldozing and smoothing the construction area, joint by end bit bolt with the dozer. According to different application situation, dozer consists of small-sized, medium-sized and large-sized type, also made of three different materials.
Dozer end bit is installed on the two sides of the cutting edge, used to touch the ground, with the cutting edge to become the whole set cutting edge assembly. The end bit of large-sized dozer is installed by the way of making the end bit with the cutting edge becoming an acute angle. In the process of frayed, it always keep the acute angle.
Performance Introduction:
Dozer cutting edge is made of three different materials. Here are the machanical properties:
Small-sized dozer cutting edge: High carbon steel mechanical properties: Hardness:HB280, Tensil strength (Rm N/mm): 1100,
Elongation (A%): 6.5, Impact test (AKV Joule): 4.5
Medium-sized dozer cutting edge: Manganese steel mechanical properties: Hardness:HB360, Yield strength(Rp.02 Mpa): 890
Tensil strength (Rm N/mm): 1050, Elongation (A%): 13.5, Impact test (AKV Joule): 80
Large-sized dozer cutting edge: Boron steel mechanical properties: Hardness:HB480, Yield strength Yied (Re N/mm): 1550, Tensil strength (Rm N/mm): 1750,Elongation (A%): 9, Impact test (AKV Joule): 30
Dozer end bit is made of three different materials.Here are the mechanical properties:
Small-sized dozer end bit: High carbon steel mechanical properties: Hardness:HB280 , Tensil strength (Rm N/mm): 1100, Elongation (A%): 6.5, Impact test (AKV Joule): 4.5
Medium-sized dozer end bit: Manganese steel mechanical properties: Hardness:HB360 , Yield strength(Rp.02 Mpa): 890, Tensil strength (Rm N/mm): 1050, Elongation (A%): 13.5, Impact test (AKV Joule): 80
Large-sized dozer end bit: Boron steel mechanical properties: Hardness:HB480, Yield strength Yied (Re N/mm): 1550, Tensil strength (Rm N/mm): 1750, Elongation (A%): 9, Impact test (AKV Joule): 30
All the products with non-human factor breakage would be replaced.
Meantime,Tungsten Carbide dozer cutting edge and end bit are also offered.The surface hardness can reach HB700.
Dozer cutting edge is made of three different materials. Here are the machanical properties:
Small-sized dozer cutting edge: High carbon steel mechanical properties: Hardness:HB280, Tensil strength (Rm N/mm): 1100,
Elongation (A%): 6.5, Impact test (AKV Joule): 4.5
Medium-sized dozer cutting edge: Manganese steel mechanical properties: Hardness:HB360, Yield strength(Rp.02 Mpa): 890
Tensil strength (Rm N/mm): 1050, Elongation (A%): 13.5, Impact test (AKV Joule): 80
Large-sized dozer cutting edge: Boron steel mechanical properties: Hardness:HB480, Yield strength Yied (Re N/mm): 1550, Tensil strength (Rm N/mm): 1750,Elongation (A%): 9, Impact test (AKV Joule): 30
Dozer end bit is made of three different materials.Here are the mechanical properties:
Small-sized dozer end bit: High carbon steel mechanical properties: Hardness:HB280 , Tensil strength (Rm N/mm): 1100, Elongation (A%): 6.5, Impact test (AKV Joule): 4.5
Medium-sized dozer end bit: Manganese steel mechanical properties: Hardness:HB360 , Yield strength(Rp.02 Mpa): 890, Tensil strength (Rm N/mm): 1050, Elongation (A%): 13.5, Impact test (AKV Joule): 80
Large-sized dozer end bit: Boron steel mechanical properties: Hardness:HB480, Yield strength Yied (Re N/mm): 1550, Tensil strength (Rm N/mm): 1750, Elongation (A%): 9, Impact test (AKV Joule): 30
All the products with non-human factor breakage would be replaced.
Meantime,Tungsten Carbide dozer cutting edge and end bit are also offered.The surface hardness can reach HB700.
Available Occasion:
Available for bulldozing and smoothing the construction area .For example, in the road construction, it can deal with the roadbed base. Besides, it can be also used to level the earth, pile up bulk material and clear away blocks in the working area.
Available for bulldozing and smoothing the construction area .For example, in the road construction, it can deal with the roadbed base. Besides, it can be also used to level the earth, pile up bulk material and clear away blocks in the working area.
Product standard:
Thickness:16mm, 19mm, 25mm, 30mm, 35mm, 40mm, 45mm, 50mm, 60mm, 65mm, 75mm, 80mm
Thickness:16mm, 19mm, 25mm, 30mm, 35mm, 40mm, 45mm, 50mm, 60mm, 65mm, 75mm, 80mm
Available type:
Available for dozer CAT D11, D10, D9, D8, D7, D6, D5, D4,CAT 12, 14, 120, 135, 130, 140, 143, 160;and KOM D455, D375, D355, D275, D155, D135, D85, D75, D65, D60, D50, D45, D40;and also CASE, FIAT, Shantui, SANY etc.
Available for dozer CAT D11, D10, D9, D8, D7, D6, D5, D4,CAT 12, 14, 120, 135, 130, 140, 143, 160;and KOM D455, D375, D355, D275, D155, D135, D85, D75, D65, D60, D50, D45, D40;and also CASE, FIAT, Shantui, SANY etc.