The multi-point temperature measurement instrument takes the highest measured temperature in measuring loops as its output signal ,Which is displayed by the built-in LED. With buttons on panel, temperature at any measuring point can be shown directly, The corresponding indicator light above is on at the same time . Hint signal for sensor fault can also be sent out in the form of high alarm or low alarm.

·multi-channel input,single output

·4 to 20 mA analog output

·Only 8 V voltage drop within whole loop circuit

·Galvanic isolation from input to output

·The highest temperature for output displaying

·Fault signal on sensor break circuit

·High accuracy in total ambient temperature range

·Ex-Certification

·IP66(aluminum alloy casing)

·Digital display  (LED)

·Anti-RFI- Certification( especially for intercom)

·MS151 Series multi-channel temperature monitor is mainly used in the applications of multi-point temperature measurement or alarm warning system. By adopting SMT technology, it offers excellent accuracy, reliability and anti-disturbance .

·Input type :  Pt100, Cu50(TC if specially required)

·Measuring Points : 4, 6 points

·Temperature at any measuring point can be displayed by operating the keys on panel,The corresponding indicator light above the key is on at the same time .

·Hint signal for sensor fault can be sent out in the form of high alarm or low alarm.

Primary Technical Characteristics
Measuring range       Set using buttons on panel with the switch in the insrument.
Input type             Pt100,Cu50(TC if specially required)
Measuring Points       4,6 points
Convert accuracy       ≤0.2％FS
linearity error          < 0.1%
Output                  4～20mA  Electrical isolation output
Digital display            LED
Display accuracy          0.2％
Voltage Drop              Only 8V within the whole loop
Isolate Voltage             1500V AC (Input/Output, with isolator)
Max-load                (V -8V)/0.025A(Current output )
Limit current              ≤25mA
Alarm signal                              Low alarm for sensor open-circuit, output≤3.9mA
                                                 High alarm for sensor open-circuit, output≥20.1mA
Response time             1s
Power supply              8~30V DC
Temperature draft          0.01% FS/ 1℃
Long-term stability         ≤0.1℃ / year or 0.05％ / year
Housing material           Aluminium alloy       
Protection level       IP66
Explosion-proof class       Ex iaⅡCT6