Product name:Floor Deck Roll Forming Machine
A, main technical parameter
1, Unpowered feeding shelf: passive feeding, manual tensing
2, Loading-bearing of feeding shelf: 8T
3, Sheet coil width: 550mm
4, Forming effective width: 550mm
5, Forming thickness: 0.8-1.2mm
6, Main forming machine station: main roller:48 groups
7, Hydraulic oil tank power: 5.5KW
8, Stitching motor power: 5.5KW
9, Forming machine motor power:13×3=45KW
10, Forming speed: 8M/min
11, Roller dimension: 90mm
12, Transmission: motor retarding device (transaction by chain)
13,Cutter material: Cr12MOV
14,Roller material: 45# after treatment
15,Roller: Surface coating with chrome, thickness is 0.05mm per side.
16,Frequency: DNAFUSS, America
17, Computer: PCL, Mitsubishi FX—IS series
18, Computer operation board: Xinjie OP320A
19,Out-put type: Roller type
20,Out-put table length: 18000mm
B, Components
It’s composed of passive feeding shelf, hydraulic front-cut device, punching device, main forming machine, stitching punching device, hydraulic forming cutting device, hydraulic station, computer control cabinet, and out-put table