TJK CNC Automatic Stirrup bending machine WG12D-2
Key words: Stirrup Bendeing machine; Stirrup bender machine, stirrup bending machine; Automatic stirrup bending machine
Description:
Products Introduction: Design by using rotation, angle can be adjusted according to requirements, maximum tilt angle 135° , can bend the stirrups diagonal ≥ 2.4m, scope of work more bigger, greatly improve work efficiency.

CHARACTERISTICS:

1. Automatic wire feeding system (CNC).
2. Germany industrial PC and control system.
3. Large storage capacity can save 500 geometric graphics.
4. Germany synchronous belt drive (International patent).
5. Emergency stop system to stop the pay-off in case of loops forming on deflection roll (patent).
6. Automatic double wire intake system.
7. Adjustment system for wire straightening with memory for different diameter wire.
8. Intelligent trouble-shoot system.
9. Automatic front door.
10. Splits cutting arm (cutting blade is separated from cutting arm), reduce spare parts replacement cost (patent).
11. Control systems: Siemens, MITSUBISHI, YASKAWA SCHNEIDER.

Products and Services:
Stirrup bender, rebar shearing line, rebar bending center, wire mesh welding machine, wire straightening and cutting machine, wire cold rolling machine, lattice girder welding machine, butt welder etc.

Production capacity	Single wire	Φ 5 – 12 [mm]
	Double wire	Φ 5 – 10 [mm]
Max. bending angle		± 180° [double direction]
Max. bending speed		1000 [° /sec]
Max. pulling speed		100 [m/min]
Mandrel diameter		Φ 25 – Φ 32 [mm]
Max. length of the stirrup side (diagonal)		1380 [mm]
Min. length of the stirrup side		120 [mm]
Length tolerance		± 1 [mm]
Bending tolerance		± 1°
Average air-compressed consumption		6 [l/min]
Average electric power consumption		5 [KW]
Labeled electric power		25 [KW]
Voltage		480 [V] – 60 [Hz]
Overall machine weight		2, 600 [Kg]
Overall dimension		8030 × 2005 × 2015 [mm]