Features:
1. With auto-dial function ( also can set with four groups speed-dial number according to requirements)
2. Storage number can be modified freely.
3. With total function of normal phone
4. Vandal resistant and tamper-resistant hardware
5. Applicable for all the environment either unattended or attended
1. With auto-dial function ( also can set with four groups speed-dial number according to requirements)
2. Storage number can be modified freely.
3. With total function of normal phone
4. Vandal resistant and tamper-resistant hardware
5. Applicable for all the environment either unattended or attended
LCD Display
- Caller ID
- Date
- Dialing number
- Conversation time counting
- Imput bank card number
- Can add or Minus function according to buyer’s need
How to store number:
1. Open phone box, put the switch “1” to “ON” side on the PCB mainboard.
2. Connect telephone line and pick up the handset
3. Input the number you want to store
4. Press any storage keys S1~S4 once (press S1 is ok for auto-dial function)
5. Put the handset back on hook and put the switch “1” back to “1” side.
How to clear out number:
1. Open phone box, put the switch “1” to “ON” side on the PCB mainboard.
2. Connect telephone line and pick up the handset
3. Press the storage key (which have stored the number) twice.
4. Put the handset back on hook and put the switch “1” back to “1” side.
Installation:
Make mounting holes on wall, then fix the unit on wall with screws.
1. Open phone box, put the switch “1” to “ON” side on the PCB mainboard.
2. Connect telephone line and pick up the handset
3. Input the number you want to store
4. Press any storage keys S1~S4 once (press S1 is ok for auto-dial function)
5. Put the handset back on hook and put the switch “1” back to “1” side.
How to clear out number:
1. Open phone box, put the switch “1” to “ON” side on the PCB mainboard.
2. Connect telephone line and pick up the handset
3. Press the storage key (which have stored the number) twice.
4. Put the handset back on hook and put the switch “1” back to “1” side.
Installation:
Make mounting holes on wall, then fix the unit on wall with screws.