Product Main

Specifications

CI-20 Cable Identification System

 

        Power cable jointing technicians are often faced with the problem of having to cut into existing live cables in order to expand their existing networks.

 

        The CI-20 was designed to facilitate the positive identification of one disconnected power cable from a bundle. It will, when used correctly positively and safely identify one specific cable. It is very simple to operate and will give perfect results time after time.

 

 

Principles of Operation

        CI-20 cable identification system consists of three parts: signal generator, receiver clamp and indication meter.

 

        Signal generator to produce specific pulse modulation signal, and applied to the disconnected cable, uses the receiver clamp and indication meter to find the measured cable at the field, When the receiver clamp detected the special signal that applied to the cable, indicator meter's pointer will synchronization swing with the imposition signal frequency. In other cable, Detected signal will have a lot of small and in the opposite direction, through the amplitude and direction of the meter indication, the able under test is very easy to determine.

 

        The application of the instrument is very simple and very low levels of skill is needed for successful positive cable identification.

 


Specifications

Signal Generator

Receiver clamp and Indication meter

Power supply

AC220V 50Hz

Power supply

Not required

Pulse voltage

60V

Current detection

5A~ 40A

Pulse current

20A

Detection method

Clamp

Output mode

Intermittent modulation

Criterion

Amplitude and Direction

Range

> 20Km

Jaw size

150mmopen

130mmclose

Time interval

5S

Operating Temp

-10 ~ 50℃

Weight

6.0Kg

 

Features

  • Accurate identification, no-compromise judgments, 100% accuracy
  • Jaw ?150mm, great for a variety of cables
  • Reliable self-protection circuit are not afraid of short output
  • Adjustable output power, suitable for all occasions
  • Simple operation without training

 

Standard Configuration

  • Signal generator
  • Receiver clamp
  • Indicator meter
  • Manual
  • Instrument box.