1.Steel grating mesh welding machine
2.Model:DP-2500G
3.Brand:DAPU
4.Usage: The machine can be used to weld the steel grating mesh
5.Specification:
2.Model:DP-2500G
3.Brand:DAPU
4.Usage: The machine can be used to weld the steel grating mesh
5.Specification:
1. Characteristic:
The machine adopts electric and electronic synchronous control technique, both welding time and separate-welding is composed of digital and integrated electric circuit. This operation is accurate, it has stable function, firm welded point, Transmission mechanism using import pneumatic components, with import welding stress even, low failure rate and long service life etc.
2. Accessorial parts: air compressor(0.9m³/min), twisted drawing machine, straightening& cutting machine, bracket, CO2welding machine, manual wheel cutting machine.
3. Use of the products:
Steel grating is widely used in the platform, corridor, bridge, stairs, fencing for power plant, civil engineering projects and environmental projects.
Steel grating is widely used in the platform, corridor, bridge, stairs, fencing for power plant, civil engineering projects and environmental projects.
4. Main parameter:
|
Diameter: flat bar 2.5*25—5*65mm(think width)
Twisted bar 5-8mm
|
Rate voltage:380v,50hz,3phase(according to the customers)
|
|
Width of mesh(max);1m
|
Power supply: 100kva,the distance between the machine and the power should no more than 50m
|
|
Length of mesh(max): 6m
|
Welding transformer: 150kva*2
|
|
Welding aperture: longitudinal aperture 30.40.50
Weft aperture 30.50.100
|
Feeding way: the flat bar should be put by the worker; the twist bar should be straightened.
|
|
Capacity: 60-100㎡/8h
|
Cutting way: manual wheel cutting machine
|
|
Weight: 4t
|
Post process: galvanize, cutting
|
Notice: the air-compressor provide the power, hydraulic control the welding head, there are two welding heads, low speed.