Jinan Chenda Testing Machin Manufacturing Co.,Ltd is specialized in manufacturing of testing machine. You can go into our website www . shiyanjishop . com / www . to see the detail products.
XJ-5.5D Electron Assembled Impacting Testing Machine is controlled by SCM and LCD. It has a good man-machine conversation and high-precision. Impact energy, impact strength and average impact strength can be calculated automatically by itself. This machine is assembled with printer. Its hammer is released in electro motion. Because of ageing treatment, the hole structure has a good rigidity.
This machine can be used in testing the impact ductility of hard-plastic, fibred composite material, nylon, glass fiber reinforced plastics, ceramics, casting iron, plastic electrical equipment, insulating material and so on. And also it is one of wide use equipments in institutions, colleges, and mechanical enterprises.
The specifications of this machine can totally match the standards as follows:
ISO179
ISO180
XJ-5.5D Electron Assembled Impacting Testing Machine is controlled by SCM and LCD. It has a good man-machine conversation and high-precision. Impact energy, impact strength and average impact strength can be calculated automatically by itself. This machine is assembled with printer. Its hammer is released in electro motion. Because of ageing treatment, the hole structure has a good rigidity.
This machine can be used in testing the impact ductility of hard-plastic, fibred composite material, nylon, glass fiber reinforced plastics, ceramics, casting iron, plastic electrical equipment, insulating material and so on. And also it is one of wide use equipments in institutions, colleges, and mechanical enterprises.
The specifications of this machine can totally match the standards as follows:
ISO179
ISO180
Technical specifications:
1> Pendulum energy, Pendulum torque
|
Izod
|
||||
|
Pendulum energy
|
1J
|
2J
|
4J
|
5J
|
|
Pendulum torque
|
0.5155Nm
|
1.0311Nm
|
2.0622Nm
|
2.5777Nm
|
|
Chargy
|
||||
|
Pendulum energy
|
1J
|
2．75J
|
5．5J
|
|
|
Pendulum torque
|
0.5155N.m
|
1.4177N.m
|
2.8355Nm
|
|
2> Impact speed:
Izod: 2.9m/s. Chargy: 3.5 m/s
3> Elevation angle of pendulum: 160°
4> Distance between the center of pendulum axes and specimen
Izod: 220mm Chargy: 322 mm
5> Jaw fillet radius:
Izod: 1mm. Chargy: 0.8mm
6> Izod brace edge front angle 5°
7> Izod brace edge back angle 10°
7> Izod brace edge back angle 10°
8> impact edge included angle:
Izod:30° Chargy:75°
9> impact edge fillet radius:Izod: 2mm Chargy:0.8mm
10> Power supply:220V/50Hz
10> Power supply:220V/50Hz
11> specifications of specimen according to ISO179\ISO180