Feature of motor cutting machine/mechanical cutting machine/electrical cutting machine :
Frame of motor cutting machine/mechanical cutting machine/electrical cutting machine :Rigid steel frame of Besco shears are optimally designed to avid weak sections at load supports and is of interlocked design. The ram is guided throughout its length by hardened and ground guide ways ensuring proper clearance and clean cut.
Hold-Down System of motor cutting machine/mechanical cutting machine/electrical cutting machine :Spring loaded mechanical hold-down pads hold the sheets securely to avoid slipping and bowing result in clean square cut. Hold down units are provided with oversize pads to avoid impression on sheet metal.
Blades of motor cutting machine/mechanical cutting machine/electrical cutting machine : shear are provided with Four Edge, single & segment ally High Carbon, Chromium Steel Blades suitable for M.S. &.S.S. Cutting and Extra long life.
Mechanical Back Gauge of mechanical plate shearing machine/mechanical shearing machine: This is a standard equipment provided on all Shears. Scale on the back gauge gives instantaneous reading of distance between shear and back gauge, thus avoiding errors and maintenance encountered in electronic equipment.
Finger Guard of motor cutting machine/mechanical cutting machine/electrical cutting machine : Fitted in front of hold-down for operator safety without obstructing viewing.
Standard Equipment of motor shearing machine/mechanical shearing machine/electrical shearing machine : Electrical System consisting of motor & Control Panel of Starter, Gear and wheel guard, V-Belts, Hand operated back gauge, Manual Lubrication System, T-slot front gauge, Front scale gauge, instruction Manual.
Optional Equipment of motor cutting machine/mechanical cutting machine/electrical cutting machine : Hydraulic hold-down system, Automatic lubrication system, Ball roller or Ball Transfer, Foundation bolts, Extension squaring arm.
"Besco" brand mechanical shearing machines are available in two versions i.e. under crank and over crank having capacities starting from 500 mm to over 3000 mm and with thickness varying from 2 to 20mm. Machines incorporate several standard, optional features like hold down systems- mechanical, hydraulic manual or auto lubrication systems- mechanical back gauge; ball roller or ball transfers; extension squaring arm finger guard etc. Special versions can also be offered to meet specific production requirements.