|
Specification
|
|
|
|
1
|
solder type
|
Lead free
|
|
2
|
max PCB
|
50—200mm
|
|
3
|
Components height
|
Above ≤130mm under ≤8mm
|
|
4
|
Capacity
|
100KG
|
|
5
|
Preheating length
|
600mm
|
|
6
|
temperature
accuracy
|
±2
|
|
7
|
spray way
|
Foam
|
|
8
|
temperature range
|
room - 300
|
|
9
|
wave height
|
0—8mm, keep balance wave crest
|
|
10
|
heating controlling
|
PID
|
|
11
|
speed
|
0—1800mm/min
|
|
12
|
start power/normal
power
|
12KW/6KW
|
|
13
|
Power supply
|
380V 3 phase 50HZ
|
|
14
|
preheating
temperature
|
room—260℃
|
|
15
|
Width adjust
|
Manual adjusting
|
|
16
|
Transmit angle
|
3－8
|
|
17
|
Direction
|
right→left (left→right optional )
|
|
18
|
controlling accuracy
|
Taiwan motor
|
|
19
|
Weight (Kg)
|
250KG
|
|
20
|
Dimension
|
1400*1000*1500MM
it is 2100mm when the machine include loading and
cooling system.
|
Flux spray system
A function of flux spray device
1 nozzle: Japan nozzle ST-6, better spray;
2 air system: AIRTAC electromagnetism valve, anti-corrosive pipe
3 moving nozzle system: air cylinder driven, spray speed and spray width can be adjusted by handle.
4 filtration flux system: collecting device is made of multi collecting lay, it is convenient to clean.
5 flux controlling: anti-corrosive controlling flux and display flux.
B Function of flux foam device
With foam function, inner foam pump, it don’t need outer air supply, it is
convenient to spray flux.
Preheat system:
1 preheat length: 600mm
2 preheating temperature range: room temperature—260℃
3 controlling way: with PID controlling to make welding process.
4 Heat: infrared heating, temperature uniformity, rapid speed, PID supply heat.
5 Preheating security: surface temperature is lower than fire point of flux.
6 Heat power: total power is 12 kw, normal is 6 kw;
7 Preheat: it can meet preheating need of batch PCB welding, uniformity
temperature, small temperature differences of PCB.
Welding system features:
1 Tin pot material: 316 stainless steel
2 Capacity: 100kg double wave crest capacity
3 Tin pot temperature room temperature ——300℃ adjusted;
4 Height range of wave crest: 0—12mm adjustment and keep wave crest balance.
5 Power consumption (heater): 6kw, uniformity heat, long life. It will take 1 hour to melt tin. This can save 6kw during melting tin and save 3kw during constant temperature.
6 Unique spray: double wave crest design, with unique flat wave which is stable and reduce SMD leaking solder.
7 Heat controlling system: PID control, accuracy is ±2
8 Moving tin pot: in and out can be finished by hand.
9 Motor of wave crest: import motor, running stable.
10 Tin pipe: screw thread stem
Cooling system
1 Cooling motor: unique cooling design, it can achieve import device effect.
Transmission system
1 chain: stainless steel chain, anti-corrosive,
ametabolic.
2 rail system: special strong aluminum
3 speed: 0—1800mm/min
4 accuracy: motor is from Taiwan, it is easy to adjust and maintain.
Controlling system
1 buttons on the panel: manual/ automatic control, speed can be set, temperature can be display.
2 protect short circuit: with short circuit protection, with Sanling air switch protection in main power and tin pot of preheating zone, with fuse power in controlling system.
3 urgent stop protection: there are 2 urgent stop protection in the machine, please cut off power in urgent condition.
4 whole machine controlling: relay controlling.
5 transmission speed: Taiwan motor makes sure stable speed.
6 wave crest: Taida transducer makes wave crest flatter.
7 over-current protection: over-current protection with transducer, it will cut off power when current is over to make motor safe.
8 modularization wiring device: there are main wiring modularization and controlling modularization.