Product Main

Specifications

solar controller
CE certification
maximum efficiency with MCUand PWM
special anti-reverse protect
Phocos' MPP-Tracker ens
 
MPPT 100/30
 
Maximum Power Point Tracker

                             Maximum Power Point Tracking Technology increases the efficiency of your PV system

                             Less expensive solar-panels for grid-feed-in systems can now be used for 12/24V off-grid systems

                             Electronic protection (reverse polarity, over-current, short-circuit, over-temperature)

                             High efficiency   DIN Rail compatible   Negative grounding

With innovative maximum-power-tracking technology, Phocos' MPP-Tracker ensures maximum performance from your solar array at all times and in all weather conditions. The MPPT can yield an energy gain of up to 30% from your PV array (with the average gain being 10%-25%).

When a Central Unit is used, up to 16 MPPTs can be used together in one system. The charge regulation is then done via data bus by the Central Unit. This will enable you to increase your system capacity substantially.

The temperature-compensated three-stage I-U curve charge regulation alogarithm significantly extends the lifespan of your battery.The possibility to use less expensive grid-feed-in solar-panels with up to 95V open circuit voltage for 12V or 24V stand-alone systems will significantly reduce the cost of the total system.

TYPE 
MPPT 100/30 
Nominal Voltage
12V/24V,automatic recognition
Nominal battery charge current
30A
Max. Solar Input Voltage Voc
95V
Max. PV Input Power
450W@12V, 900W@24V
Max. Battery Charge Current
33A
Power Conversion Efficiency
over 98 %
Standby Power Consumption

< 30mW at 12V system voltage (< 2mA)
< 80mW at 24V system voltage (< 3mA)

Temperature compensation
-4 mV/cell*K
Max. wire size
32mm2
Dimensions
185 x 150 x 115mm
Weight
1.6kg
Temperature range
-40 to +50 °C
Type of protection