1.Brake assembly for OEM and Aftermarket
2.Quality is controlled according to DOT and ISO9001-2008
3.100% test before shipment

• ARC is much experienced in designing and producing hydraulic brake hose assemblies according to customers requirements and international safe standards;
• Every hose assembly is tested in production and after production before shipment;
• We will test our brake hose assembly strictly according to SAE J1401 standard before shipment

Unique feature	Pressure test	No leakage in 2 min under pressure of 19.6±0.48 Mpa
	Volumetric expansion	Less than 1.068cm3/m under 6.9Mpa; less than 1.283cm3/m under 10.3Mpa
	Burst test	No leakage over 60 Mpa
	Low temperature	No visible crack without magnification within 72 hr under -55°C
	Whip test	No damage after 35 hrs rotating at 800rpm
	Tensile test	No breakage or rupture with 2310 N tensile stress
	Ozone test	No cracks when examined under 7X magnification under 50 in 50mpa±5mpa
	Water absorption test	No leakage under 60 Mpa; no damage within 50hr; no breakage or rupture with 2080 N tensile stress