These horizontal/vertical rotary tables are for indexing, circular cutting, angle setting, boring, spot facing operations and similar work in conjunction with a millers. This type rotary table is so designed as to permit machining operations at larger dimensions than that of TS type rotary table. The base can be used in a vertical position to enable to carry out center work with the help of tailstock. A flange for connecting scroll chuck is specially supplied and be packed independently. For special order, the dividing plate accessory allows the operator to accurately divide the 360 deg rotation of the clamping surface into divisions of 2 through 66 and all divisible of 2, 3 and 5 from 67-132.

Parameter	RT100HV	RT160HV	RT200HV	RT250HV	RT320HV	RT400HV
Diameter of table, mm	100	160	200	250	320	400
Morse taper of center hole	2#		3#		4#
Diameter of center hole, mm	20X8	25X6	30X6		40X10
Height of center for vertical mounting, mm	70	125	150	170	210	260
Width of T-slot, mm	6	10	12		14
Adjacent angle of table T-slot, Deg	90			60
Width of positioning key, mm	10	12	14		18
Modules of worm gear	1	1.5	1.75	2	2.5	3.5
Ratio of worm gear	1:72	1:90
Graduation of the table, Deg	360
Readout of handle-wheel, Min	2	1
Min. reading of vernier, Sec	10
Indexing accuracy, Sec	120	80	60
Max. load capacity with table horizontal, Kgf	20	100	150	200	250	300
Max. load capacity with table vertical, Kgf	10	50	75	100	125	150
Net weight, Kgs	7	23	31.5	46	77	150
Gross weight, Kgs	8	30	42	57	92	175
Packing size(LXWXH), cm	24X16X11	43X43X22	45X44X24	51X46X24	59X58X25	75X68X29