Classificatory  Item  Unit  Parameter
Outline dimension Overall length mm  13500
 Overall width mm  2800
 Overall height mm  3510
 Wheel base Axle 1, Axle 2 mm  1520
  Axle 2, Axle 3 mm  3965
  Axle 3, Axle 4 mm  1350
Mass Total mass in travel state kg  41000
 Axle load Axle 1, Axle 2 kg  15000
  Axle 3, Axle 4 kg  26000
Travel performance Travel speed Max. travel speed km/h  75
 Turning diameter Min. turning diameter m  24
  Min. turning diameter at boom tip m  29.0
 Min. ground clearance mm  270
 Approach angle (')  16.5
 Departure angle (') 11.3
 Braking distance (at speed of 30km/h) m  <10
 Max. grade-ability %  40
 Fuel consumption for 100km L  42
Power Engine rated output kW/(r/min.)  266/2208
 Engine rated torque N.m/(r/min.)  1460/1400
 Engine rated speed rpm.  2200
 
 
Main Technical Data for Lifting Operation
Classificatory Item Unit Parameter
Lifting performance Max. total rated lifting capacity t  70
 Min. rated working radius m  3
 Turning radius at turntable tail m  3550
 Max. load moment Base boom kN.m  2303
  Fully extended boom kN.m  1043
  Fully extended boom + Jib kN.m  492.8
 Outrigger span Longitudinal m  5.75
  Lateral m  6.9
 Lifting height Base boom m  11.2
  Fully extended boom m  42
  Fully extended boom + Jib m  58
Working speed Boom elevating time Boom raising S  75
 Boom telescopingtime Boom full extension/retracting S  150/100
 Max. swing speed r/min  2.0
 Outrigger telescoping time utrigger beam
extending/retracting synchronously  S  30/20
  Outrigger jack
extending/retracting synchronously  S  35/12
 Hoist speed
(single line)  Main winch Full load m/min  75
   No load m/min  130
  Aux. winch Full load m/min  98
   No load m/min  108