100W Power Supply Single Output CE
Technical Data
Index Type |
S-100-3 |
S-100-5 |
S-100-7.5 |
S-100-12 |
S-100-15 |
S-100-24 |
S-100-27 |
S-100-48 |
Dc Voltage |
3V |
5V |
7.5V |
12V |
15V |
24V |
27V |
48V |
Voltage Tolerance |
±2% |
±2% |
±1% |
±1% |
±1% |
±1% |
±1% |
±1% |
Rated Current |
20A |
20A |
13.6A |
8.5A |
6.7A |
4.5A |
3.7A |
2A |
CurrentRange |
0-20A |
0-20A |
0-13.6A |
0-8.5A |
0-6.7A |
0-4.5A |
0-3.7A |
0-2A |
Ripple&Noise(Max.) |
100mVp-p |
100mVp-p |
100mVp-p |
100mVp-p |
100mVp-p |
100mVp-p |
100mVp-p |
100mVp-p |
Line Regulation |
±0.5% |
±0.5% |
±0.5% |
±0.3% |
±0.3% |
±0.2% |
±0.2% |
±0.2% |
Load Regulation |
±1% |
±0.5% |
±0.5% |
±0.3% |
±0.3% |
±0.2% |
±0.2% |
±0.2% |
Rated Power |
60W |
100W |
102W |
102W |
100.5W |
108W |
99.9W |
96W |
Efficiency |
70% |
78% |
80% |
81% |
81% |
84% |
84% |
84% |
Voltage Adjust Range |
2.85-3.3V |
4.75-5.5V |
6.75-8.25V |
10.8-13.2V |
13.5-16.5V |
21.6-26.4V |
26-32V |
43.2-52.8V |
VoltageRange |
85~132VAC/180-264VACauto switch 47~63Hz;255~370VDC |
|||||||
Ac Current |
2.4A/115V 1.2A/230V |
|||||||
Inrush Current(Max.) |
cold start current 30A/115V 60A/230V |
|||||||
Leakage Current |
<1mA/240VAC |
|||||||
Overload Protection |
135%-165%TYPE:OUTPUT CUTOUT AC Restart |
|||||||
Over-voltage Protection |
...................... |
|||||||
Over-temperature Protection |
...................... |
|||||||
Temp.Coefficient |
±0.03%/℃(0~50℃) |
|||||||
Setup.Rise, Hold Time |
200ms, 50ms, 20ms |
|||||||
Vibration |
10~500Hz, 2G 10min, /1cycle, 60min, each axes |
|||||||
Withstand Voltage |
I/P-O/P:3KVACI/P-FG:1.5KVACI/P-FG:0.5KVAC |
|||||||
Isolated Resistor |
I/P-O/P, I/P-FG, I/P-FG:500VDC/100MΩ |
|||||||
Working Temp.Humidity |
-10℃~+60℃(REFER TO CHARACTER CURVE), 20%~90RH |
|||||||
Storage Temp.Humidity |
-20℃~+85℃, 10%~95%RH |
|||||||
Dimension |
199×98×38mm |
|||||||
Weight |
0.65kg |
|||||||
Safety Standard |
UL1012 |
|||||||
EMC |
FCC part15J class B |
Note:
1.All parameters NOT specially mentioned are measured at 230VAC input , rated load and 25 of ambient temperature.
2.Tolerance:includes set up tolerance, line regulation and load regulation
3.Ripple&noise are measured at 20MHZ of bandwidth by using a 12 twisted pair-wire terminated with a 0.1uf&47uf parallel capacitor.
4.line regulation:min&max voltage of the rated load.
5.load regulation:load from 0 to 100%.