FWT Serial :

?        Connect to standard FXO Interface
Offer 2/4/8 FXS Interfaces
Standby Voltage:45~50 V
Hook Voltage:9~12 V
Ring Voltage(Peak):75 V
Supply Current:32 mA
SLIC Impedance:600 Ohm
Ringing Frequency:25 Hz
Signal Tone Frequency:450 Hz
Busy Tone:350 ms / 350 ms
CallerID:DTMF,After 1 ring

?        Antenna: 50 Ohm,4.5dB

?        Power Supply
Input: 85~265VAC
AC Frequency:50Hz

2       FWT400-S  (GSM Single Port)
FWT400-4  (GSM Four Ports)
FWT400-8  (GSM Eight Ports)
FWT400-8-32SIM  (32 Cards)
FWT400-8-64SIM  (64 Cards)
FWT400-8-ONU (One Number Unified)
[GSM bands:850/900/1800/1900M]

2       FWT810-S  (CDMA Single Port)
FWT810-4  (CDMA Four Ports)
FWT810-8  (CDMA Eight Ports)
FWT810-8-32SIM  (32 Cards)
FWT810-8-64SIM  (64 Cards)
FWT810-8-ONU (One Number Unified)
[CDMA bands:800M]
[R-UIM Card / no R-UIM Card]

2       FWT620-S  (WCDMA Single Port)
FWT620-4  (WCDMA Four Ports)
FWT620-8  (WCDMA Eight Ports)
FWT620-8-32SIM  (32 Cards)
FWT620-8-64SIM  (64 Cards)
FWT620-8-ONU (One Number Unified)
[WCDMA bands:850/1800/2100M]
[Compatible with GSM 4 Bands]

Perfect Features:

ü        SIM Rotation Automatically
According to
   Times Dialed Out
   Minutes Total Talking
   Minutes On line
   Real-time Clock

ü        IMEI Rotation Automatically
According to
   Minutes On line
   Different SIMs to different IMEIs

ü        IMEI can be edit

ü        Base-Station Rotation Automatically
Simulation of the handheld devices

ü        Automatically Answer incoming calls

ü        Automatically Send SMS,
Message content can be edited

ü        Forward Automatically message Received

ü        Ambient noise can be set

ü        Automatically use next SIM when
Call failed Continuously / Short Call Continuously / SIM Broken / Standby timeout

ü        Dial out * #

ü        Re-dial Automatically

ü        Rapid respons when busy

ü        Set Dial-Delay time

ü        Set the number digits

ü        Set number of replacement

ü        CLIR

ü        Set barring numbers

ü        Set number prefix

ü        Set prohibit incoming

One Number Unified :

There are 8 phone numbers (8 SIMs) in the GSM device (FWT-8-ONU)

You just released the first of the eight phone numbers to your customers

If your customers call the first number

You can speak to eight clients at the same time

The feature is widely applied in PBX Relay / VoIP Original .

SIM BANK/SIM Server :

SIM Rotation automatically according to:

Times Dialed Out ;
Times of Total Talking ;
Minutes of Total Talking ;
Minutes On line ;
Real-time Clock ;
SIM Blocked ;

IMEI Rotation automatically according to:

 Minutes on line ;
      Rotation SIM ;

The device (FWT-8-32/64SIMs) can automatically check the validity of the IMEI and correct it , also can generate valid IMEI and rotate it .

The device can automatically register to different base station as the handle devices simulation

The featrue is widely applied in VoIP Terminal .

Group Call :

Group call automatically .

You can write 100 called telephone numbers at every port by date cable ,

You can set to call out 1~6 phone numbers at the same time .also can set the time (Seconds) of talking and waiting .

One device , Group calling ,Ok!

Call Back :

Single line automatic callback, save half line resources

The featrue is based on MultiParty business .

MultiParty Call :

MultiParty Call is valid .

A  Release all Kept calling ;

B0 Release all active calling ;
Bx Release active calling x ;

C0 Keep all active calling ;
Cx Keep all calling in addition to x ;

D  Activate one kept calling to Party ;

BoV Serial :

?        BoV (Bridge of Voice)

?        GSM = GSM
FWB2GG  (2 Bridges, 4 SIMs)
FWB4GG  (4 Bridges, 8 SIMs)

?        GSM = CDMA
FWB2GC  (2 Bridges, 4 SIMs)
FWB4GC  (4 Bridges, 8 SIMs)

?        CDMA = CDMA
FWB2CC  (2 Bridges, 4 SIMs)
FWB4CC  (4 Bridges, 8 SIMs)

?        Antenna: 50 Ohm,4.5dB

?        Power Supply
Input: 85~265VAC

There are 2 SIM cards in each bridge,

when the usre calls card A,
BoV answers automatically, accepts the number that the user wants to call, then dials it out from card B;

when the usre calls card B ,
BoV answers automatically, accepts the number that the user wants to call, then dials it out from card A