Marble laser engraving machine features
1). The upper part and the under part of the machine are separated. The upper part can put on large and thick marbles/stones/granites directly.
2). The machine is double up-down worktable. The upper part and the under part can move up and down automatically, which are very convenient for thick material.
3). Very useful for small house doors.
Machine Parameter
1). The upper part and the under part of the machine are separated. The upper part can put on large and thick marbles/stones/granites directly.
2). The machine is double up-down worktable. The upper part and the under part can move up and down automatically, which are very convenient for thick material.
3). Very useful for small house doors.
Machine Parameter
|
Model
|
JQ-1060 Separable Laser Engraving Machine
|
|
Laser Power
|
60w
|
|
Cooling Model
|
Water cooling
|
|
Working Area
|
100cm*60cm / 39.4in*23.5in
|
|
Engraving Speed
|
0-60000mm/min / 0-2362in/min
|
|
Cutting Speed
|
0-30000mm/min / 0-1181in/min
|
|
Location Precision
|
≤±0.01mm
|
|
Supported Graphic Format
|
BMP, PLT, AI, DST, DXF
|
|
Supported Software
|
AutoCAD, Coreldraw, Photoshop, Tajima
|
|
Highest Scanning Precision
|
2500 DPI
|
|
Operating Temperature
|
0 – 45 Degree
|
|
Operating Humidity
|
5- 95%
|
Applicable material
marble, granite, ceramic, plate, wood, acrylic, organic glass, crystal, ceramic, glass and other non-materials, etc.