Profile of Water Valve
LG-BV01 Ball valve, LG-CV01 and LG-CV02 check valve, LG-SV01 Y type strainer valve, LG-GV01& LG-GV02 Gate valve, LG-LV01& LG-LV02 lock valve for water, brass or copper body.
Check Valves
LG-BV01 Ball valve, LG-CV01 and LG-CV02 check valve, LG-SV01 Y type strainer valve, LG-GV01& LG-GV02 Gate valve, LG-LV01& LG-LV02 lock valve for water, brass or copper body.
Check Valves
Check valves are mechanical valves that permit gases and liquids to flow in only one direction, preventing process flow from reversing. They are classified as one-way directional valves. Fluid flow in the desired direction opens the valve, while backflow forces the valve closed. The mechanics of check valve operation are not complicated.
Gate Valves
Gate valves incorporate a sliding gate to block fluid flow. The design of the valve operating and sealing systems typically requires thatgate valves should be operated either fully open or fully closed.
Technial requirement
1. Before assembling , all parts should be cleaned, no oil and grease in it.
2. Remove all sharps and burrs edges
3. Before connecting, body cap male thread should be coated with sealing glue
4. Handle and close freely
5. After assembling, test by water at pressure no less than 0.8Mpa, no leakage.