RX/A series gas pressure regulator is generally used for medium and low gas pressure regulation in gas transmission system in the locations of blocks of buildings or living areas. It is concentrated in itself the function of gas filtration, regulation, distribution, safety cutoff, ball valves, etc. It is widely applicable in natural gas, coal gas, LPG, and other non-corrosive fuel gases. 

Technical Parameters

     Inlet pressure P1:        0.02～0.4MPa    

     Outlet pressure P2:       1～ 4KPa (adjustable)

                           1～ 7KPa (only for RX35/0.4-80)

     Regulation accuracy:     ≤±15%

     Turn off pressure Pb:    ≤1.25P2n

     Shut off accuracy:       ±5%

     Ambient temperature:    －20～60℃

     Inlet outlet diameter:     DN25, DN40, DN50, DN80

 

 

1.     It is installed with filtration device to increase regulation reliability

2.     Auto cutoff at over pressure, then manual reset

3.     Blocks of components, compacted in structure, easy for installation and maintenance

4.     Inside bleeding valve, good for safety and reliability, especially at extra high pressure when downstream valves shut off or under high temperature

5.     Die cast aluminum case, in nice appearance