Offsetting Flail Mulcher/Flail Mower
1. Side shift offsetting European style.
2. Cutting width from 1200mm to 1800mm.
3. Cutting height adjust.
4. "Hammer" Or “ Y” type blade can be exchangeable.
Offsetting Flail Mulcher Descriptions:
EKFLHS is a very strong offsetting mower. It mulches grass and brush up to 7 cm [2.8“ ] in diameter. Hydraulic angling and hydraulic side shift make it possible to work in many different positions and situations. It is thus suitable for the maintenance of greenspace such as slopes, road sides, or of steep orchards and vineyards. As on all the flail mowers, it is possible to adjust the height of cut and the degree of mulching.
The EKFLHS offsetting mulcher can be hydraulically angled from +90° to -50°, indepentently from the side shift. Maximum side shift is 180 cm [71“ ]. With maximum side shift the mulcher can reach up to 355 cm [132“ ] to the right of the tractor center line, depending on the working width.
Standard Versions
- mulches grass and bushes up to 7 cm [2.8” ] Ø
- working speed 1– 5 km/h
- cat. 2 ISO 3-point linkage
- hyd. Positioning from +90° to -50°
- hyd. Side shift to the right
- 540 rpm gearbox with cross shaft
- rear protection: rubber flap
- support roller adjustable in height 5 cm [2” ]
- anti-shock device
Model
|
Cutting width
(mm)
|
Blades’s number
|
Blade type
|
Hydraulic angling
|
Matched power of tractors(hp)
|
Linkage
|
EKFLS1600
|
1600
|
32( “hammer” type) Or
64 (“Y”type)
|
“Hammer” Or “ Y”.
Both type blades can be exchangeable
|
-50°to 90°
|
50-90
|
CAT Ⅱ
|
EKFLS1800
|
1800
|
36( “hammer” type) Or
72 (“Y” type)
|
||||
EKFLS2000
|
2000
|
40( “hammer” type) Or
80 (“Y” type)
|
70-120
|
|||
EKFLS2200
|
2200
|
44( “hammer” type) Or
88(“Y” type)
|
||||
EKFLS2400
|
2400
|
48( “hammer” type) Or
96 (“Y” type)
|