<GREEN> Polyimide Tubing

 

Item

Unit

Specification

Diameter

mm

Ø0.18 - Ø7.5

Thickness

mm

0.02 - 1.0

Length

mm

3-3048

Density

g／cc

1.41

Dielectric Strength

KV／Mil

＞3

Coefficient of Friction

--

0.05

Long-term Service Temperature

℃

220

Short-term Temperature Resistance

℃

260

Tensile Strength

PSI

20, 000

Elongation at Break

％

50

Coefficient of Heat Conductivity

℃／cm

35.0x105

Coefficient of Thermal Expansion

per℃

4.0 x 105

Radiation Resistance

rd

3.0 x 109

EXP

12 months

Storage Conditions

20°C  65%R.H

Product Features

Polyimide tube is made of polyimide material using special molding. Polyimide exhibits outstanding mechanical, electrical and thermal characteristics. Compared to other polymers, polyimide can be made into insulation tubes with extremely short diameter and thin wall thickness. The minimum inside diameter of 0.1mm is available and the thinnest wall thickness of 0.015mm is producible. This product ensures superior thermal resistance, high voltage resistance, chemical corrosion resistance along with other capabilities such as out gassing, anti-nuclear radiation, and optimal flexibility for easier installation.

Application

Polyimide Tube can be used in insulation of wiring or circuitry which in need of thermal resistance, voltage resistance, and in products in need of protection from corrosion, radiation. eg: a number of micro drives, heaters, small motors, circuit board testers, etc..

Note

◆It should be noted that the above listed specifications does not guarantee the performance of goods, it is for reference only.

◆No prior notice will be given for any changes of technical specifications.