Patent product :solid angle appearance design ,patent number: ZL 2009 3 0188679.1
Structure feature:
1. Materials are corrosion-resistant,aging-resistant,good performance flame-retarding ABS or diecasted aluminum materials.
2. Rectangle lamp body and cubic triange cover or plain rectangle cover.
3.Connect the lamp shade and the hull with the silica rubber gel sealing,heat-resistant,aging-resistant; Pattern,words,colors can be appointed as per the requirements.
4.Fix the light on the wall with the stainless or hot dipping puff bolts.
Using conditions:
1. Envrionment temperature :-25°C-+40°C.
2. Concentration of SO2>30mg/m3 ; concentration of N2O5>100mg/m3.
3. Bearing the wind speed :80m/s.
Electric performance:
1.working volt: 220V(-10%~+8%).
2.working frequency :50Hz
3.power factor:>0.9
4.prevent to get an electric shock protection :class I.
5.insulation resistance between the end of inputting alternative current and the hull is not less than 500MΩ .
6.storage battery is provided if needed.Battery can be used 90-120 min.
7: IP code:65.
Structure feature:
1. Materials are corrosion-resistant,aging-resistant,good performance flame-retarding ABS or diecasted aluminum materials.
2. Rectangle lamp body and cubic triange cover or plain rectangle cover.
3.Connect the lamp shade and the hull with the silica rubber gel sealing,heat-resistant,aging-resistant; Pattern,words,colors can be appointed as per the requirements.
4.Fix the light on the wall with the stainless or hot dipping puff bolts.
Using conditions:
1. Envrionment temperature :-25°C-+40°C.
2. Concentration of SO2>30mg/m3 ; concentration of N2O5>100mg/m3.
3. Bearing the wind speed :80m/s.
Electric performance:
1.working volt: 220V(-10%~+8%).
2.working frequency :50Hz
3.power factor:>0.9
4.prevent to get an electric shock protection :class I.
5.insulation resistance between the end of inputting alternative current and the hull is not less than 500MΩ .
6.storage battery is provided if needed.Battery can be used 90-120 min.
7: IP code:65.