900L series soldering tips

Models:

900L-T-K, 900L-T-I, 900L-T-5CF, 900L-T-5C, 900L-T-4CF, 900L-T-4C, 900L-T-3CF, 900L-T-3C, 900L-T-2CF, 900L-T-2C, 900L-T-S1, 900L-T-3.2D, 900L-T-2.4D, 900L-T-2B, 900L-T-B

 

The tip is applied to soldering station 900L, 900L-ESD, 908, 908-ESD, 934

 

1. Long life circle, it can reach 13-15 cycles (Metal turn over), [cycle means the nickel content after every litre making all the nickel out and adding to the cylinder, a cycle can be deposited at least 900 dm2 ?μm/hr coating];

 

2. The highest speed up to 20μm/hr, coating low porosity, 15μm no pore;

 

3. Plating state high hardness, Hv above 700, usually the heat treatment can be omitted but still have high wear resistance;

 

4. Strong solder ability, it has the best plating on the market at present;

 

5. very excellent anti-corrosion effect in alkaline medium;

 

6. Strong competitiveness in deep plating and uniform plating;

 

7. Good combination quality and high hardness surface make low phosphorus plating excellent in wear resistance.